Installation, T61 rear panel, Positioning the unit

Installation

					AUDIO	AERIALS
				OUTPUTS		AERIALS
				OUTPUTS
			12V		FM 75Ω	GND	AM
			12V
		IR IN	TRIGGER	AM STEP	L
			IN
POWER INLET	120V	230V			R
POWER INLET	120V	230V
				1	2

3 4 5

7 8 9

T61 rear panel	1 Socket for IEC power inlet line
	2 Voltage selector switch
	3 Remote control input
	4 Power On/Standby trigger in
	5 AM step switch

6 Audio output phono sockets, two pairs

7 FM coaxial plug

8 Ground socket (for AM loop aerial)

9 AM socket (for AM loop aerial)

Positioning the unit

Always place the tuner on a level, ﬁrm surface.

Setting up the tuner

AM step switch 5

The AM tuning ‘step size’ needs to be set according to your location. This is done using the switch on the rear panel: set it to 10kHz if you are in North America, or 9kHz anywhere else. This switch also ensures correct reproduction of FM broadcasts for your location.

AM aerial

An AM aerial is required to receive AM/Medium Wave radio signals.

An external AM loop aerial is supplied as an accessory. This should be attached to the AM Antenna inputs with one end connected to AM 9 and the other to Ground 8. It does not matter which way round this aerial is ﬁtted. Rotate the aerial to discover which position gives the best reception.

In areas of weak reception or when the receiver is used inside a steel framed building (such as an apartment building) you can use a wire between 3 and 5 metres long to strengthen reception. Mount this high up outside the building, if possible, and connect one end of this wire to the AM antenna input 9 as well as the loop aerial supplied. DO NOT DISCONNECT THE LOOP AERIAL.

FM aerial

An FM aerial is required to receive VHF radio signals. An external FM ribbon aerial is supplied as an accessory.

For optimal FM radio reception a roof or loft mounted aerial is advised. For your own safety it is recommended that a roof top aerial is ﬁtted by an experienced contractor. Your Arcam dealer should be able to put you in contact with an aerial installer.

A contractor will be able to tune your aerial to the nearest

FM transmitter. In an apartment building an aerial system may already be installed. If this is the case you should have sockets in your home marked FM or VHF (do not use those marked TV).

The ‘T’ shaped wire aerial (dipole design) supplied should give reasonably good reception. Mount this aerial as high up as possible on a wall with the elements positioned horizontally. Try each usable wall of the room to see which gives best reception. Use tacks or adhesive tape to secure the aerial in a T shape. The tacks should not come into contact with the internal wire of the aerial.

Whether you decide to get an aerial professionally installed or opt to use the supplied aerial it should be connected to the FM Antenna input 7 on the rear of the unit.

For use in North America, use an F-type antenna connector; for Europe and other areas, use a female Belling Lee-type coaxial connector.

T61

T61 specifications

The Arcam T61 is a highly regarded network music player that fits seamlessly into the realm of high-fidelity audio systems. This device is designed to deliver superior sound quality, catering to audiophiles and music enthusiasts alike. The T61 stands out for its ability to stream high-resolution audio, making it a versatile option for those who demand excellence in their listening experience.

One of the main features of the Arcam T61 is its support for a wide range of audio formats, including FLAC, WAV, ALAC, and DSD, enabling users to play music from both digital libraries and streaming services. The device boasts integrated Wi-Fi and Ethernet connectivity, allowing users to access a variety of streaming platforms, including Spotify, Tidal, and Qobuz, effortlessly. This integration means that users can immerse themselves in vast music libraries, all while enjoying crystal-clear sound, thanks to Arcam's commitment to maintaining audio fidelity.

The T61 utilizes advanced technology such as Bluetooth connectivity and Apple AirPlay. This versatility allows users to easily stream music from their smartphones or tablets, ensuring that they can enjoy their favorite tracks without being tethered to a specific location. Furthermore, the T61 includes high-quality DACs (Digital-to-Analog Converters), enhancing the audio clarity and detail across the spectrum.

In terms of characteristics, the Arcam T61 features a sleek, modern design that blends well with various home decor styles. Its user interface is intuitive and straightforward, ensuring that even those new to high-end audio can navigate with ease. The display is user-friendly, providing relevant information about the audio being played, and the remote control further simplifies the experience.

The T61 is also compatible with multi-room audio setups, allowing users to synchronize music across different rooms in their homes. This feature enhances the versatility of the device, making it an excellent choice for those looking to create an immersive listening environment.

Overall, the Arcam T61 represents a culmination of advanced audio technology, user-friendly design, and high-performance specifications, making it an excellent addition to any music lover's collection. With its rich feature set, it emerges as a top contender in the competitive landscape of high-end audio systems, ensuring that users can enjoy their music in the best possible quality.