PRINTER WALL REFERENCE
Pathfinder® Ultra® Silver (6032™) Printer | Pathfinder® Ultra® Platinum (6039™) Printer |
See the Equipment Manual for more information.
Loading Supplies in Peel Mode
1Turn on the printer and put it into load mode.
6032: Press the Load Key.
6039: Select the supply loading option from the display screen.
Or, ask your System Administrator.
2 Press the latch buttons | 3 Open the | 4 Insert the supply roll so it |
and open the supply cover. | supply holder. | feeds from the bottom. |
Supply Cover |
|
|
Latch Buttons
5 Peel four inches of labels | 6 Pull the Label Deflector down. | 7 | Feed all four inches of the backing paper under the applicator roller, |
from the backing paper. |
|
| over the peel bar, and under the label deflector. |
|
|
| Applicator Roller |
|
|
| Peel Bar |
| Label |
| Label Deflector |
| Deflector |
|
|
8 | Push the Label Deflector | 10 | Pull the backing paper |
| up until it snaps into place. |
| over the Guide Roller, |
9 | Partially close the cover |
| down to the Pinch and |
| Feed Rollers. | ||
| to the first position. |
| Press the trigger. |
Guide Roller (behind supply)
11
Close the cover and press ESC or return to the previous menu.
Pinch and
Feed Rollers
Cleaning Your Printer | NOTE: Always turn off the printer before cleaning. |
| |
Platen Roller | Pinch and Feed Rollers | Printhead | Printer Flex Cable |
Adhesive
Buildup
Cable
Use a dry, | Use a dry, | Use a cleaning pen or a | Use a soft cloth, lightly |
|
| soft cloth, lightly moistened | moistened with |
|
| with 91% Isopropyl Alcohol. | 91% Isopropyl Alcohol. |
Platinum Display Screen | Scanner Window | Black Mark Sensor |
Display
ScreenOn-Demand
Sensor
Pull the
Label Deflector down.
Use a soft cloth, lightly moistened with water.
Use a dry cotton swab.
Use a soft cloth, lightly moistened with water.
Use a dry cotton swab.
TC603XWC Rev. AD 1/08 | ©2003 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All Rights Reserved. |