Item Pricing Application
________________________________________________________________________
To set up the printer to communicate:
♦the communication parameters must be set.
♦a communications cable must be connected from your PC to your printer.
♦the printer must be in Receive mode.
The following are the correct settings - an asterisk indicates
Parameter | Default |
|
|
Baud Rate: | 9600* |
Parity: | Odd* |
Data Bits: | 7* |
Stop Bits: | 1* |
Flow Control: | Xon/Xoff* |
Echo BEL: | (does not matter) |
ENQ Polling: | enable |
Resp.Timeout: | 30* |
|
|
35