2-10 CHAPTER 2: INSTALLING THE FMS 100-TX HUB
4Remove the burned-out fuse by pulling it straight out of its socket, as shown in Figure 2-8.
Figure 2-8 Removing the Fuse
If you wish, you can store a spare fuse in the front section of the fuse-holder.
5Insert a new fuse, rated at 2 A, 250 V, in the fuse-holder.
6Push the fuse-holder back into the AC receptacle until it snaps in place, and reconnect the AC power cord.
If the PWR LED remains off, contact your network supplier.
