RuggedCom RS910W manual Serial Ports, Fiber Serial Interface, 2 RS232/RS485/RS422 via DB9

Page 14

3 Serial Ports

The RS910W can be equipped with a Fiber Serial Interface, RS232/RS485/RS422 DB9 serial ports or RS232/RS485/RS422 RJ45 serial ports.

3.1.1 Fiber Serial Interface

The RS910W can be equipped with a Fiber Serial Interface (ST connector only) which allows RS485, RS422, or RS232 devices to communicate over secure, noise immune, optically isolated, fiber optic cabling at extended distances as well as protocol independent conversion to multimode fiber optics.

Figure 9: Fiber Serial Interface (ST Connector)

3.1.2 RS232/RS485/RS422 via DB9

Each port is individually selectable via software to be RS232, RS485 or RS422. The DB9 port and pin-out is shown in Figure 10.

	14
 2007 RuggedCom Inc. All rights reserved	Rev100

Image 14

Contents RuggedWireless RS910W Installation GuideTrademarks Table of Contents Table of Figures Functional Overview Feature HighlightsProduct Overview Activity Comments RS910W Front Panel DescriptionStatus LED Colour RS910W Bottom Panel Description RS910W Bottom Panel DescriptionInstallation Din Rail MountingPower Supply Wiring and Grounding AC Power Supply Wiring and GroundingDC Power Supply Wiring and Grounding DC Power supply wiring and grounding diagramDielectric Strength Testing Dielectric Strength TestingFailsafe Output Wiring RS910W Failsafe Output RelayRS232 Console Port Wiring Pin Signal2 RS232/RS485/RS422 via DB9 Serial PortsFiber Serial Interface Pin RS232 Mode 3 RS232/RS485/RS422 via RJ454 RS485 Wiring Shows the recommended RS485 wiringConceptual recommended RS485 wiring diagram Serial Port Transient ProtectionRJ45 Ethernet Ports Pin Signal +RxEthernet Ports Fiber Optic Ethernet Ports Ethernet Panel DescriptionEthernet panel LED description Failsafe Relay Specifications Technical SpecificationsPower Supply Specifications Operating EnvironmentIeee 802.11b/g Wireless Standards SupportedRadio Characteristics Standard ParameterSerial Ports Japan, channel 14 is not supported for 802.11g modeParameter Specifications Copper PortsFiber Optic Ports Parameter SpecificationEthernet Ports RJ45Communication Standards MM / MtrjMechanical Specifications Parameter ValueType Tests IEC 61850-3 Type TestsIeee 1613 Type Tests IEC Environmental Type TestsWarranty Appendix a RuggedWireless Frequently Asked Questions FAQ What factors can affect wireless coverage/range?13 W DBm Watts10 W 16 W