3Com WX4400 3CRWX440095A, WXR100 3CRWXR10095A, WX1200 3CRWX120695A „ Ssid default Vlan enter name

52CHAPTER 3: CONFIGURING WIRELESS SERVICES

Table 9 Creating a Service for Employee Access (continued)

			Primary Parameters to
Task	Path		Configure
“Create a	1	Tool bar option: select	From the Create Service Profile
Service Profile		Configuration.	wizard:
for 802.1X	2	Organizer panel: expand	„ Service profile name: edit name
Access” on
		the WX switch.
page 59			„ SSID name: enter name
	3	Expand Wireless.
			„ Security mode: select WPA (and
	4
		Click Wireless Services.	deselect Dynamic WEP)
	5	Select 802.1X Service	„ Encryption type: use TKIP
		Profile in the Task List.	(already selected)
			„ EAP Type: use External RADIUS
			Server (already selected)
			„ RADIUS server group: select one
			„ SSID default VLAN: enter name
			„ Radio profile: select one
“Set Up	1	Tool bar option: select	From the Create VLAN wizard:
VLANs on WX		Configuration.	„ VLAN Name: enter name
Switches” on	2	Organizer panel: expand
page 64			„ VLAN ID: select number
		the WX switch.
			„ IP Address: enter IP Address
	3	Expand System.
			„ Ports: select them and either
	4	Click VLANs.
			move them (use them only in
	5
		Select VLAN in the Task	the new VLAN) or add them
		List.	(share them with other VLANs)

„ If you add them, select Tag

Step Summary The following list summarizes the fields selected or configuration items entered in the example that follows to configure Employee access:

1Create a radio profile.

„From the Radio Profile wizard, enter RadioProfile1 as the name of the radio profile.

„Click Finish.

2Configure the RADIUS back end:

„Configure the RADIUS server for 802.1X. Use the recommended EAP method, PEAP + MS-CHAPv2.

„Set up each WX switch as a RADIUS client.

„Define any desired 3Com vendor-specific attributes (VSAs).