3Com 9000 manual Managing CoreBuilder Switch Power Supply, Admin Status

Page 32

32CHAPTER 3: MANAGING DEVICES

Managing the

CoreBuilder 9000

Switch Power Supply

Device View provides you with the following power management features for the CoreBuilder 9000 Switch:

■You can find out the status of power supplies and fan units, and temperature data for the chassis.

■You can set Admin Status to Fault Tolerant or Non-Fault Tolerant mode.

■You can enable or disable Overheat Power Down mode.

■You can set the Power Class.

■You can enable or disable the Power State

To manage a CoreBuilder 9000 Switch power supply:

1Select the CoreBuilder 9000 Switch chassis.

2Click the right mouse button.

3From the shortcut menu, select Inventory.

4Select the PSU, Fan Status, or Temperature tab.

The Fan Status and Temperature dialog boxes are informational. The PSU dialog box provides status information, enables you to set Admin Status and Overheat Power Down mode, and provides access to the Modify PSU dialog box. The Modify PSU dialog box enables you to change the Power Class setting and the Power State mode.

Admin Status

You can set Admin Status to Fault Tolerant or Non-Fault Tolerant mode. Power non-fault-tolerantis:

■A mode in which 100 percent of the power that can be allocated to modules is available to them (no power is held in reserve).

■The default mode for power supplies as shipped.

While the chassis is running in power non-fault-tolerant mode, the amount of power that is available to modules is determined only by the number of power supplies that are installed. If a power supply fails while the chassis is running in non-fault-tolerant mode:

■Installed modules continue to operate without interruption if the output of the remaining power supplies is sufficient to provide adequate power to all installed modules.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Device View User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Index About this Guide If you are looking to Turn to Finding SpecificInformation This Guide Convention Description ConventionsIcon Description Related DocumentationYear ComplianceAbout Device View About Device View Description Agent 3Com Version Part Number Management Support MatrixManagement Support Matrix About Device View Using Device View Using Device View Preparing PlatformStarting Device ViewCentral Power Supply/Fan left Color indicates status Managing a CoreBuilder 9000 SwitchManaging Media Modules Segments, Ports Filtering with the Media Selection Bar Using Device View Using Tabs in the Notebook Interface Device View Help for Security Settings Managing Devices Switches Device SettingsManaging CoreBuilderIP Configuration Settings Chassis SettingsModule Settings Bridge Settings RAP SettingsManaging Devices Managing Power Systems Managing CoreBuilder Switch Power Supply Admin StatusOverheat Power Down Mode Power Class ModulePower State Managing Devices Advanced Management Tasks Viewing PerformanceStatistics On the type of port or device that you select1Virtual LAN Support 1Virtual LAN Support Managing Virtual LANs Advanced Management Tasks Vlan Features Layer Modules Switch Feature Fabric DescriptionLayer Modules Switch Fabric Feature Description Ieee 802.1Q is a standard for VLANs. It aims to Before assigning a VID, review the information in Table Number DescriptionManaging Virtual LANs Advanced Management Tasks Filtering Vlan Selections Deleting VLANs Index Index
Related manuals
Manual 460 pages 2.71 Kb
Top Page Image Contents