User Manual
4-2-6. LACP
The switch supports the link aggregation IEEE802.3ad standard. This standard describes the Link Aggregate Control Protocol (LACP), which is a protocol that dynamically creates and manages trunk groups.
When you enable LACP link aggregation on a port, the port can automatically negotiate with the ports at the remote end of a link to establish trunk groups. LACP also allows port redundancy, that is, if an operational port fails, then one of the “standby” ports become operational without user intervention.
Function name:
LACP Port Configuration
Function description:
Enable or disable LACP protocol, user is allowed to set the aggregation key value.
Parameter description:
Protocol Enabled:
Just tick the check box ( ) to enable LACP protocol then press the <Apply> button to apply.
Key Value:
It’s key for an aggregation. This must be an integer value between 1 and 255 or auto select by switch.
Fig. 4-11 LACP Port Configuration
Publication date: March, 2007
Revision A1
61