Internet Camera | Quick Installation Guide | |
|
|
|
Connecting to the Camera
Using IPWizard II:
After the installation of the IPWizard II, double click on the icon,
you will see this window popup as the basic management of the IPWizard II. Once it popup, the wizard will perform an auto search to see if you have any camera in the Network.
The window below is an example of what this may look like:
1. | Device Title | This part shows the Device name found in the network |
2. | IP address | Here shows the IP address of the found Camera |
3. | Port | Here shows the Port used of the found Camera |
4.Minimize and Close The orange circle will minimize the window and the red circle will close
Window | this window |
5. MAC | This shows the MAC address of your Camera |
Double Click on the above information bar will open up the Camera
| management page in your default Web Browser. |
|
|
6. Search | When launch the IPWizard II, a searching window will pop up. IPWizard II |
| is starting to search Network Cameras on the LAN. The existed devices will |
| be listed. |
|
|
9