Quick Installation Guide
Wireless Adapter
5.Carefully insert the USB adapter into the USB port. Windows will then detect and install the new hardware.
6.An R icon will then appear in the system tray. Right click on the R icon and then click on Launch Config Utilities.
Note: Click on Use Zero Configuration as Configuration Utility if you would like to use Windows Zero Config.
USB Adapter Adding a Profile – Windows 2000/XP/Vista
The Profile tab is used to store the settings of multiple Access Points such as home, office, café, etc. When adding a profile you are required to enter a profile name and SSID as well as configure the
1. Profile: Enter a name for the profile; this does not need to be the same as the SSID.
2.SSID: Enter the SSID of the network or select one from the
3.Network Type: Select Infrastructure from the
4.TX Power: Select a transmit power from the
5.Click on the Apply button to save the changes.
5