Kaito electronic KA009R Radio Operation see diagram for location of controls, Band selection

KA009R	Kaito
15. Cellphone Charger Jack
1.	Connect the Cellphone to the Jack
	Use the included cable to connect the cellphone and
	the charger. Insert one end of the cable to jack, find
15	a proper tip to connect the cable and cellphone.
2.	Charging the Cellphone (Two ways to charge)

Method 1: Crank the Dynamo Cranking Handle smoothly to charge the cellphone.

Method 2: Use the AC adaptor to charge the cellphone. Plug the AC adaptor

to the power outlet, the radio will charge the cellphone.

Note: If you want to charge the built-in Ni-MH batteries with the AC adaptor, please pull out the phone cable. When the phone is connected with the Radio, it would not charge the built-in Ni-MH batteries.

KA009R Kaito

Radio Operation (see diagram for location of controls)

Set the power switch 1 to the desired power source: AC/DC adapter, external batteries, internal rechargeable "AA" batteries or solar power.

Band selection:

There are two band selector switches which work in conjunction with each other to allow the selection of FM/TV/AIR/WB/AM/SW1/SW2/ SW3/SW4.

To receive :

Medium Wave: (AM Broadcast Band) 2 A should be in AM/SW

FM : set		position and 2 B should be in AM position
		2 A to FM,	2 B can be on any position.
TV1:	set	2 A to TV1,	2 B can be on any position.
TV2:	set	2 A to TV2,	2 B can be on any position.

9 10