Mechanical Interfaces

OAW-AP65

•1 x 10/100 Base-TX (RJ-45) auto-sensing Ethernet interface

•Auto-sensing MDI/MDX

•PoE 48VDC / 220mA power over Ethernet (802.3af compliant)

•Supports Serial over Ethernet

•Rear Mounted

•1 x 5V DC External Power Interface

OAW-AP70

•2 x 10/100BaseTX RJ-45 auto-sensing Ethernet interfaces (Port 0)

•Auto-sensing MDI/MDX

•PoE 48V DC / 250mA power over Ethernet (802.3af compliant)

•Serial over Ethernet (Port 1)

•Auto-sensing MDX

•PoE 48V DC / 250mA power over Ethernet (802.3af compliant)

•Redundant Ethernet data link and power over Ethernet

•USB ver2.0 interface

•1 x 5V DC power interface

OAW-AP80

•1 x 10/100 Base-TX auto-sensing Ethernet interface (IP67 8-pin male (pole) M12 circular DIN connector (Au) contacts)

•Auto-sensing MDI/MDX

•PoE 48V DC / 1.2A (30W) power over Ethernet (non-standard 802.3af)

•Integral lightning arrester

•1 x 2.4 Ghz N-Type Female Antenna Interface

•1 x 5 Ghz N-Type Female Antenna Interface

•1 x Electrical Ground / Safety Terminal

•1 x Integral ENET lightening arrester

OAW-AP41 MECHANICAL INTERFACES

• Wall-mount lugs

OAW-AP60 AND AP61 AND OAW-AP70

•Standard Kensington MicroSaver security cable interface (not supplied)

•Optional wall and ceiling mount kit interface

OAW-AP65

•1 x Integrated ceiling tile rail snap-in mount (for 15/16” diameter rails). Located on rear of device

•1 x Kensington locking interface

OAW-AP80

•4 x Mounting Bracket Points

•Ruggedized wall, pole or mast mount hardware provided (articulating in horizontal and vertical planes)

Visual Indicators (LEDs)

OAW-AP41

•(Ready) Power on/off/booting

•(ENET) Link status / activity

•(WLAN A) IEEE 802.11a status

•(WLAN G) IEEE 802.11b/g status

OAW-AP60 AND AP61 AND OAW-AP70

•(Ready) Power on/off

•(Ethernet) link status / activity

•(Radio mode) 802.11a and b/g AP /air monitor mode

OAW-AP65

•(Ready) Power on/off/booting

•(Ethernet 0) link status / activity

•802.11a + b/g Wireless Access Point

•802.11a + b/g Wireless Air Monitor

OAW-AP80

• (Ready) Power on/off (provided on Power injector)

Power Requirements

OAW-AP41

•48V DC / 200mA power-over-Ethernet (802.3af compliant)

OAW-AP60

•External AC power or POE

•5V DC / 2A supplied externally via optional country specific AC adapter kits

•48V DC / 200mA power over Ethernet (802.3af compliant)

OAW-AP65

•External AC power or POE

•5V DC / 2A supplied externally via optional country specific AC adapter kits

•48V DC / 220mA Power-over-Ethernet (802.3af compliant)

OAW-AP70

•External AC power or POE

•5V DC / 3A supplied externally via optional country specific AC adapter kits

•48V DC / 250mA power over Ethernet (802.3af compliant)

OAW-AP80

•Access Point power draw - 48V DC / 1.2A (30W) Power-over-Ethernet (non-standard 802.3af)

•External Power Injector, auto-sensing 100- 240V AC Input, 1.5A Output 48 VDC, 1.2A (30W) (provided)

Riverstone Networks OAW-AP41 Mechanical Interfaces, Visual Indicators LEDs, Power Requirements

OAW-AP70