Rosewill RX251-US user manual

Page 6

Dual INTERNAL (SATA)/EXTERNAL (USB) 2.5" SATA HDD Enclosure RX251-US		User Manual

Connect the 2.5” SATA hard drive to the connector on the board. Please check the HDD & board’s pin is match when installation.

Turn over the board and fix the board and hard drive by screws.

Slide the board with the hard drive back into the enclosure.

Close the panel and fix it by screws.

-5-

Image 6

Contents RX251-US RX251-US Product Specification RX251-US Introduction Insertion Bay Bracket Sata HDD EnclosureAccessories P qRX251-US Hardware Installation Install the hard drive in the enclosurePage Method 1 Install the RX251-US in the 5.25 drive bay Desktop PCPage From power supply Page Method 2 Install the RX251-US in the 3.5 drive bay From power supply Page Portable external storage Thank you for purchasing a quality Rosewill Product