Rosewill RSV-S4-X user manual RAID Level Min # Disks

Page 90

4 Bay SATA to eSATA 3.5” HDD RAID Storage System RSV-S4-XUser Manual

 

Click the On or Off button to enable or disable the Check Pointing feature. When

 

Check Pointing is enabled, restoring data is very fast after an unexpected power

Check

loss, although normal performance may be slightly reduced. When Check Pointing

is disabled, normal performance is improved, but restores can take a long time to

Pointing

complete. This selection is only available when the selected RAID configuration is

 

 

Mirrored, Mirrored Striped or Parity RAID, and the “Advanced RAID Features”

 

checkbox in the Configuration/Advanced Options dialog is checked.

 

 

 

 

 

 

Click the On or Off button to enable or disable the ability to return “dirty” data after

 

an unexpected power loss and all of the data could not be written to disk, rather

Parity

than taking the volume off-line. This selection is only available when the selected

 

RAID configuration is Parity RAID and the “Advanced RAID Features” checkbox in

 

the Configuration/Advanced Options dialog is checked.

 

 

 

 

 

 

Select the RAID member devices from the available device segment grid. Up to five

Devices

members can be selected for Contiguous, Concatenated, Mirrored, Striped or

Parity RAID modes (although Mirrored RAID Groups will typically contain only two

 

 

members). Exactly four members must be selected for Mirrored Striped mode.

 

 

 

 

 

 

 

 

 

 

 

 

RAID Level

Min # of

 

 

 

 

Disks

 

 

 

 

 

 

 

 

0

2

 

 

 

 

 

 

 

 

1

2

 

 

 

 

 

 

 

 

5

3*

 

 

 

10

4*

 

 

 

 

 

 

 

 

Contiguous

1

 

 

 

 

 

 

 

 

Concatenated

1

 

 

 

 

 

 

Once all parameters have been selected, select “Create” to create the RAID Group. When

finished, press Cancel to exit the Create RAID Group Dialog.

*For 3132, this requires the use of a Port Multiplier device to access more than one disk per SATA channel.

90

Image 90
Contents Bay Sata to eSATA 3.5 HDD RAID Storage System Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Content Sata RAID5 Array Manager 100 Precaution WelcomeData Security FeaturesEase of USE Data PerformanceSpecifications Supported Operating SystemsProduct Contents Introduction to RAID Segmenting DisksRAID Levels Disk Striping RAIDDisk Mirroring RAID Disk Mirroring and Striping RAIDParity RAID RAID ConcatenationRAID Volume Status Single Drive / SegmentInstalling Sata RAID Host BUS Adapter Installing HardwareInstalling on Windows ComponentsBay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Click Browse… to select to driver path, than click OK Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Click Browse… to select to driver path, than click OK Installing SATARAID5 Utility Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Disk Drive Mode Setup Allocating PartitionSelect Disk Management under Storage to view the disk drives Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the Create Partition Wizard has completed, click Finish Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Installing on Windows XP 32/64-BIT Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the installation has completed, click Finish Installing SATARAID5 Utility Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Select Typical, than click Next Allocating Partitions on Windows XP 32-BIT When Initialize and Convert Disk Wizard appears, click Next Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the New Partition Wizard has completed, click Finish Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Allocating Partitions on Windows XP 64-BIT When Initialize and Convert Disk Wizard appears, click Next Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the New Partition Wizard has completed, click Finish Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Installing on Windows Server 2003 32/64-BIT Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the installation has completed, click Finish Installing SATARAID5 Utility Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Select Typical, than click Next Allocating Partitions When Initialize and Convert Disk Wizard appears, click Next Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X When the New Partition Wizard has completed, click Finish Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Installing on Windows Vista 32/64-BIT Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Installing SATARAID5 Utility Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Select Typical, than click Next Disk Drive Mode Setup Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Sata RAID5 Array Manager OverviewCreating RAID Groups Contiguous RAID GroupsConcatenated RAID Groups Striped RAID GroupsMirrored RAID Groups Mirrored Striped RAID GroupsParity RAID Groups RAID Groups Overview Field DefinitionRAID Level Min # Disks Additional Menu Commands Main menu commands are shown belowConfiguration Log File TabBay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Popup Tab Bay Sata to eSATA 3.5 HDD RAID Storage System RSV-S4-X Advanced Options Exit Create Spare Delete SpareDelete Member Delete OrphanMake PASS-THRU Device SummaryCreate RAID Group FieldsRebuild RAID Group Delete RAID Group Bring RAID Group OnlineRAID Group Summary This command closes the RAID Group Summary window Task Manager File Options TaskOpen Suspend Event LOG Resources FieldsCreate Legacy RAID Group Help Topics111

RSV-S4-X specifications

The Rosewill RSV-S4-X is a robust and versatile rackmount server chassis designed for various computing needs, particularly in enterprise environments. It serves as a reliable solution for those looking for durability, performance, and expandability in their server infrastructure.

One of the standout features of the RSV-S4-X is its capacity to accommodate up to four 3.5-inch hard drives, making it suitable for applications requiring significant storage space. The chassis supports hot-swappable drives, allowing users to replace hard drives without powering down the server, thus minimizing downtime and enhancing overall efficiency.

The design of the RSV-S4-X is focused on effective airflow management. It is equipped with multiple cooling fans, which ensure that the internal components maintain optimal operating temperatures. This is crucial for preventing overheating during prolonged usage, thus extending the lifespan of the hardware within.

This chassis is constructed with high-quality steel, providing excellent durability and a sturdy build that can withstand the rigors of a data center environment. The front panel features two USB 3.0 ports, enabling fast and convenient data transfer and connection to various peripherals. Additionally, it includes an integrated power supply, simplifying the installation process and ensuring that users can get their systems up and running quickly.

Another significant characteristic of the Rosewill RSV-S4-X is its flexibility in terms of hardware compatibility. It supports standard ATX motherboards, along with various other form factors, which allows users to customize their server configurations according to their specific needs. This adaptability extends to the installation of multiple expansion cards, providing options for enhanced networking and graphics capabilities.

The chassis also comes with pre-installed standoffs for easy motherboard installation, a feature that simplifies setup for both novice and experienced builders. With a weight of approximately 22 pounds, it strikes a balance between robustness and manageability.

In summary, the Rosewill RSV-S4-X is an excellent choice for users seeking an efficient, flexible, and reliable rackmount server chassis. Its ability to deliver strong performance, combined with thoughtful design elements, makes it a standout option in the competitive server hardware market. Whether for a small business or a larger enterprise, the RSV-S4-X is well-equipped to handle demanding workloads with ease.