Hardware Installation, Driver Installation

USB 2.0 5-Port PCI Adapter RC301		User Manual

Hardware Installation

zTurn Off the power to your computer.

zUnplug the power cord and remove your computer’s cover.

zRemove the slot bracket from an available PCI slot.

zTo install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.

zReplace the slot bracket’s holding screw to secure the card.

zReplace the computer cover and reconnect the power cord.

Driver Installation

For Windows® XP/2000

Windows® XP/2000 will automatically detect and install the correct driver for the PCI VIA USB 2.0 Card. However, please ensure you have the latest Service Pack Installed.

For Windows® XP

Windows® XP Service Pack 1 or later

For Windows® 2000

Windows® 2000 Service Pack 4 or later

For Windows® Server 2003/Vista

Windows® Server 2003/Vista has built-in driver support for this controller. Just install the board and Windows will automatically detect and install the correct drivers for it. No additional driver is necessary.

To Verify Driver Installation

Right click My Computer, then click Manage. Click Device Manager.

Double click Universal Serial Bus controllers option.

-USB Root Hub (USB 2.0 Root Hub in Windows® 2000)

-USB Root Hub

-VIA Rev 5 or later USB Universal Host Controller (VIA USB Universal Host Controller in Windows® 2000)

-VIA USB Enhanced Host Controller

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.