Led, Status Operation | Rosewill RFS-105, RFS-108 guide

Please refer to the following table for LED definition

5port

		8port

LED	Status	Operation
Power	Steady Green	Power is on
	Off	Power is off
Link/Act	Steady Green	The port is connected
	Blinking Green	The port is transmitting/receiving
		data.
	Off	No connection

Connect each station to the switch by twisted-pair cable. Plug one RJ-45 connector into a RJ-45 port of the switch, and plug the other RJ-45 connector into the station’s network adapter. Power on the switch and then system is ready.

For cable selection, refer to the following table.