Rose electronic vista manual Scan mode Off, Scan time interval, Reset, Send null byte

Page 23

To enable the “Scan mode”, press and release the left <Ctrl> key, then type S. The Vista switch will begin scanning sequentially from its current computer through the remaining computers (as set by the maximum computers command), and then begin again at computer 1.

Scan mode (Off)

To stop the “Scan mode”, press and release the left <Ctrl> key and then type “X”. Issuing a computer select command also turns off scanning.

Scan time interval

The “Scan Time interval” command sets the time, in seconds that the Vista switch will pause at each of the computers when scanning. The default setting is 5 seconds. To change the Scan Time to another interval press and release the left <Ctrl> key, type “T” then enter the new scan time interval (1-16 seconds), and press <Enter>.

Reset

To “Reset” the mouse and keyboard, press and release the left <Ctrl> key, then type “R”. This command is used to reset the mouse and keyboard on the currently selected Vista port without removing power from the Vista switch. This is most useful to reset a PS/2 mouse that has been unplugged and plugged back in. Upon issuing this command, all keyboard LEDs will go on and then return to their previous state.

Reset computer mouse type (NT and WIN 2K systems only)

DO NOT issue this command on non-NT or Win 2K based computers. Press and release the left <Ctrl> key, then type “O”. This command sends a reset mouse command to the currently selected NT or Win 2K computer. The command is used to recover a stuck mouse on an NT or Win 2K system.

Send null byte

Press and release the left <Ctrl> key, then type “N”. This command is used to re-synchronize an out-of-sync PS/2 mouse. The command may need to be entered once or twice, depending if the mouse is out-of-sync by one or two bytes.

Identify ROM version

Press and release the left <Ctrl> key, then type “I”. This command is used to identify the revision level of the Vista firmware currently installed. Before entering this command, the selected CPU must be at a command prompt, word processor, or text editor, so when the Vista switch sends the ROM revision level the result can be displayed.

Vista L-Series Installation and Operations Manual

17

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Vista L-SERIES Installation and Operations Manual Page Limited Warranty FCC/IC STATEMENTS, EU Declaration of Conformity Table of Contents Appendix TablesIntroduction IntroductionOptional on-screen display OSD features FeaturesCompatibility Package contentsCPU connections OverviewSystem overview KVM stationRose Electronics web site Power connectorsVista L-Series models ModelsHD15F Label Connector type DescriptionVista L-Series Installation and Operations Manual Vista to KVM station cable CablesVista cables Vista to CPU cablesConnecting the KVM station InstallationInstallation Vista to CPU Connect the CPUsRack mounting Applying powerVerify keyboard, mouse and CPU operation Vista to CrystalView Operating instructions Keyboard commandCommand Key Sequence Description Operating InstructionsKeyboard commands Command Key Sequence Description Next computer Keyboard command descriptionScan mode On Computer selectScan time interval Scan mode OffReset Reset computer mouse type NT and WIN 2K systems onlyMaximum computers Keep commandMode command Typematic commandReset to initial factory settings Vista Menu Structure MenusOn-screen display option Vista L-series menu structureVista main menu version Copyright 1990 Main menuConfigure computer name Change the name color/position and screen saver Configure appearanceName font Appearance options Foreground/Background colorName x or y position Name fadeout timeScreen saver time Configure securityScreen saver type Access time Configuration passwordAccess password Configure mouse type Configure keyboard type Scan time Configure miscellaneousMaximum ports Exit SaveComputer select window TroubleShooting TroubleshootingVideo not synchronized or wrong color Cannot remember the configuration or access passwordVideo fuzzy Mouse does not moveTechnical support ServiceMaintenance and repair Safety SafetyServicing Safety and EMC regulatory statementsSafety Information GroundingSafety and EMC regulatory statements Appendices Setting Default ValueRackmount Kits CPU Adapter Cables for Models with PC ConnectorsAppendix C. General specifications Appendix D. Rack mount instructions Appendix E. Rack mount illustration Typematic Rate Typematic DelayIndex IndexPage Stancliff Road Phone 281 Houston, Texas

vista specifications

The Rose Electronic Vista is an advanced keyboard video mouse (KVM) switch designed to optimize the management of multiple computer systems from a single console. This versatile device is particularly popular in data centers, server rooms, and environments where space and efficiency are paramount. Its main features combine technological innovation with user-friendly functionality, making it an ideal solution for IT professionals.

One of the standout characteristics of the Rose Electronic Vista is its ability to support a wide range of video resolutions. It accommodates resolutions up to 1920x1200, ensuring that users can maintain high visual quality, crucial for tasks involving graphic applications or high-definition content. The device also boasts compatibility with all major operating systems, including Windows, Mac, and Linux, allowing it to serve diverse computing environments seamlessly.

The Vista KVM switch operates on the principle of centralized management. It enables users to control multiple servers or workstations using a single keyboard, mouse, and monitor. This centralized approach not only simplifies transitions between systems but also increases productivity by minimizing the need for multiple peripherals. Equipped with hotkey functionality, users can quickly switch between systems, enhancing the workflow and efficiency during high-demand operations.

Another key aspect of the Rose Electronic Vista is its robust security features. The device supports independent switching of keyboard, video, and mouse signals, ensuring that sensitive data is protected during operations. Additionally, it incorporates advanced encryption protocols and secure access features, which are essential in environments where data integrity and security are top priorities.

In terms of connectivity, the Vista KVM switch offers a range of port options, including USB and PS/2, as well as support for both analog and digital displays. This flexibility allows users to connect various devices without facing compatibility issues. Additionally, the switch can often integrate with existing network infrastructure, providing remote access capabilities via web-based interfaces or dedicated client software.

Overall, the Rose Electronic Vista stands as a reliable and powerful KVM switch with features tailored to meet the needs of modern IT environments. Its flexibility, security, and user-friendly design make it an invaluable asset for those looking to optimize their digital workspace and streamline operations across multiple systems.
Top Page Image Contents