Dynamic Range Control ( DRC ) settings – DAB
DRC can make quieter sounds easier to hear when your radio is used in a noisy environment.
1.Press the On/Off button to switch on your radio.
2.Press and hold in the Advanced in button until display shows “Manual tune“.
3.Rotate the Tuning control until the display show “DRC“.
4.Press and release the Tuning control to enter adjustment mode.
5.Rotate the Tuning control to select required DRC setting (default is 0) DRC 0 DRC is switched off, Broadcast DRC will be ignored. DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6.Press and release the Tuning control to confirm the setting. The display will return to radio mode.
Note:
Not all DAB broadcasts are able to use the DRC function.
If the broadcast does not support DRC, then the DRC setting is the radio will have no effect.
GB
16