UltraMatrix Single unit Installation
The following installation procedure features the 4XE model. Installation for other models (2, 4, or 8 computers) follow the same basic procedure.
It is recommended that power to all monitors, computers, and UltraMatrix be off until all connections have been made.
The below illustration shows the basic cable connections for UltraMatrix and the installation steps to properly connect the cables, computers, and KVM stations to UltraMatrix.
CPU adapter | KVM adapter |
cable | cable |
KVM Station
1.Connect a KVM station to the KVM 1 DB25F connector using the appropriate KVM adapter cable. Depending on the model, connect other KVM stations to the KVM x DB25F connector.
2.Connect the computers to UltraMatrix using the appropriate CPU adapter cable. Connect the keyboard, monitor, and mouse computer ports to the corresponding connectors on the CPU adapter cable. Connect the DB25M connector to the CPU DB25F connector on UltraMatrix.
3.Connect other computers (4, 8, 12, or 16 depending on model)
4.With all cabling in place, power on all monitors, the UltraMatrix switch, and boot the computers last.
Please refer to the Installation and Operations manual for the installation procedure for an expanded system.