Panduit DPOE24S1X, DPOE24U1X manual Basic Troubleshooting, DPoE Power Patch Panel Power Up Sequence

Page 16

PANDUIT® DPoE™ Power Patch Panel User’s Guide

Issue 2.2

 

Part Number: PN378A

 

 

Table 6: DPoE™ Power Patch Panel Power Up Sequence

Behavior as viewed from the back of the unit

Both network status LEDs will light amber for two seconds

If there is no cable connected to the IN management port (Step 5 above), both network status LEDs will turn off.

If the DPoE™ Power Patch Panel is configured for DHCP address assignment (default factory setting), the network status LED above the IN management port will stay amber and the network status LED above the OUT management port will turn off. This indicates that the panel is actively requesting address information from the network. Once this information is received (this could take up to a minute), the network status LED above the IN management port will turn on or start flashing green as data is transmitted and received.

If the panel were set to static IP addressing rather than DHCP, the network status LED above the IN management port will immediately turn green.

Behavior as viewed from the front of the unit

The panel status Light-Emitting Diode (LED) will light red for about 10 seconds. After that, a LED test sequence of the port status LEDs will take place, lighting each port status LED amber. It will appear as if the port status LED is “walking” from port 1 through port 24.

If the Patch Panel is configured for Dynamic Host Control Protocol (DHCP) address assignment (default configuration) and a cable is NOT connected to the IN management port on the rear of the panel, the panel status LED will turn green.

If the DPoE™ Power Patch Panel is configured for DHCP address assignment (default factory setting), the panel status LED will flash amber. This indicates that the panel is actively requesting address information from the network. Once this information is received (this could take up to a minute), the panel status LED will flash green. (See page 5, Figure 1: DPoE™ Power Patch Panel (Front View) and page 6, Figure 2: DPoE™ Power Patch Panel (Rear View) for a graphical view of the LEDs on the DPoE™ Power Patch Panel.)

If the panel were set to static IP addressing rather than DHCP, the panel status LED will flash green and continue flashing as long as power is applied to the unit.

Basic Troubleshooting

Use the following guide to help resolve problems installing the DPoE™ Power Patch Panel. If the problem persists, contact PANDUIT Corp Technical Support or a local sales representative. (See page 9, Table 3: PANDUIT Corporation Contact Information, for contact information.)

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DPoE Power Patch Panel User’s Guide Part Number PN378A AugustWarranty Table of Contents View Panel Screen Edit Panel ScreenPackage Contents Overview Features and Benefits DPoE Power Patch Panel Rear ViewDPoE Power Patch Panel Feature Benefit Package Contents Panduit Corporation Contact Information DPOEPWRB120YPanel Mounting Procedure Connecting the Powered Devices Color-Coded Wire Positions for Alternate PoE Devices Power Requirements Powering Up the DPoE Power Patch Panel Basic Troubleshooting DPoE Power Patch Panel Power Up SequenceBasic Troubleshooting Guide ON. See page 38, Edit Port Information, forPanel Status LED Indications LED IndicatorsPort Status LED Indications Network Status LED Indications Hardware and Software Requirements PC Minimum Requirements for EMInstalling the Element Manager Software RequiredPage Element Manager Operation System-Level Opening Screen Page Page Page Subnetwork Search IP Range Search Page Page Page Page View Panel Screen − Panel IP Address − Panel Attributes− Snmp Settings − Trap SettingsCopy/Paste/Delete Panel Information View Port Information View All Ports Screen − Edit Port InformationView Individual Port Screen Export Log View Message Log Screen − Filter Log Messages − Export Log− Clear Log Page Page Tabs EM Log Messages Page Page Page DPoE Power Patch Panel Firmware Update LED Status System LED Network LEDEND Appendix 1 DPOE24S1X and DPOE24S1XY Installation Panduit Corp Contact Information PAN-TY’SPanel Mounting Procedure Connecting the Powered Devices Color-Coded Wire Positions for Alternate PoE Devices From Network Power Requirements Page Powering Up the DPoE Power Patch Panel Technical Specifications Glossary

DPOE12U1X, DPOE24S1X, DPOE24U1XY, DPOE12U1XY, DPOE24S1XY specifications

Panduit, a leading provider of infrastructure solutions, has introduced a range of innovative products to support the evolving needs of networking and telecommunications. Among these are the DPOE12U1XY, DPOE24S1X, DPOE24U1XY, DPOE12U1X, and DPOE24S1XY, designed to enhance performance and reliability in various applications.

The DPOE12U1XY is a high-density patch panel that offers 12 ports in a 1U form factor. Its compact design makes it ideal for environments where space is at a premium. It supports a range of cabling types, including Cat 6A and Cat 6, while also accommodating various connector styles. This flexibility ensures that users can adapt to different networking requirements without compromising on performance.

Similarly, the DPOE24S1X and DPOE24S1XY models cater to larger installations, featuring 24 ports in a 1U configuration. These models focus on providing exceptional port density while maintaining compliance with industry standards for performance and reliability. Their versatile design allows for easy integration into existing systems, making them an excellent choice for data centers and enterprise networks.

The DPOE12U1X also joins this lineup, offering 12 ports in a unique design optimized for ease of use. With its simple installation process and intuitive labeling system, this panel simplifies network management and minimizes downtime during upgrades or maintenance.

All models in this series leverage advanced technologies such as enhanced cable management and efficient airflow design, ensuring optimal performance and reduced overheating. They also feature robust construction, providing reliability and durability in demanding environments.

Key characteristics of these Panduit products include color-coded ports, allowing for quick identification and troubleshooting, and a modular design that supports future scalability. Additionally, the panels offer compatibility with the Panduit Pan-Track system, facilitating organized cable routing for improved aesthetics and performance.

In summary, the Panduit DPOE series provides a comprehensive solution for networking needs, combining high density, ease of installation, and advanced technology. Whether for a data center or an office environment, these products stand out as reliable choices for enhancing network infrastructure.
Top Page Image Contents