Palm Wi-Fi Card manual Chapter

CHAPTER 1 Using Your Palm® Wi-Fi®Card with the Treo™ 700w Smartphone

—WPA-PSK:Indicates the network is a WPA network that requires a preshared key (password).

•Data Encryption: Sets the encryption method. The options in this list vary based on your Authentication setting.

—Disabled: Turns data encryption off.

—WEP: Turns on the wired equivalent privacy encryption method.

—TKIP: Turns on the temporal key integrity protocol encryption method. This method is often used to encrypt WPA and WPA-PSK connections.

•The key is automatically provided: Indicates whether you need to specify the network key and key index provided by your network administrator, or whether the network provides this information. The availability of these options varies based on your Authentication and Data Encryption settings.

8.Select the 802.1x tab, and then set the following if available (the settings vary based on your settings on the other tabs):

•Use IEEE 802.1x network access controls: Lets you set these parameters if required by the network.

•EAP type: Specifies the extensible authentication protocol type.

•Properties: Lets you set additional certificate options.

9.Press OK twice. This returns you to the Settings screen and connects you to the configured network.

6 Using Your Palm Wi-Fi Card