Connecting the Speakers (Con’t)
|
Speaker Installation
How to Install the Speaker and the Stand (Tallboy Type)
ENG
Rear Speaker (R) | Center Speaker |
Rear Speaker (L) | |
| Subwoofer |
Front Speaker (R) | Front Speaker (L) |
|
|
1 | 2 |
3 | 4 |
5 | 6 |
1 Turn the STAND
2 Turning the screw (A) clockwise, connect it to two holes marked with the arrow using a screwdriver as shown in the illustration.
3 Turning the supplied screw (B) clockwise, connect it to a hole on the rear of the Speaker STAND.
4 Connect the assembled stand to the SPEAKER.
5 Turning the screw (B) clockwise, connect to a hole on the rear of the speaker using a screwdriver as shown in the illustration.
6 This is the successfully assembled speaker.
•Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.
CONNECTIONS
Rear Speaker (R) | Rear Speaker (L) |
Center Speaker
Subwoofer
Front Speaker (R) | Front Speaker (L) |
|
|
How to Install the Speaker and the Stand (Half Tallboy Type)
1 | 2 | 1 | Connect the SPEAKER with the STAND BASE. |
|
| ||
|
| 2 | Turning the screw (B) clockwise, connect to a hole on the |
|
|
| rear of the speaker using a screwdriver as shown in the |
|
|
| illustration. |
|
| 3 | This is the successfully assembled SPEAKER. |
3
Component
STAND BASE
SPEAKER | STAND Screw (A) Screw (B) |
14 | 15 |