communication is done from client to client without the use of an Access Point. Channel: Shows the number of the radio channel used for the networking. Only Access Points and
SSID: Shows the SSID of the BSS that one willing to join.
Tx Rate: Shows the Data Transfer Rate. There are 1 Mbps, 2M bps, 5.5 Mbps, 11 Mbps, and auto mode. If Auto Mode is been selected, the device will select the most suitable rate automatically.
Power Mgmt Mode: Shows Power Management modes. There are two optional selections for this mode.
Power Save
Signal Strength: This bar shows the signal strength level. The higher the blue bar, the more radio signal been received by the Wireless USB adaptor. This indicator helps to find the most comfortable antenna/workstation position for quality network operation.
Link quality: The measured Signal Strength level gives the overall Link Quality and Connection Status.
MAC Address: The MAC Address of the Wireless USB Adaptor. Unique
3.2"Statistics"
Show the total amounts of packets been received or transmitted by the adaptor.
Data Field: Shows the total amounts of data packets been successful/unsuccessful transmitted or received by the adaptor..
Management Field: Shows the total amounts of management packets been successful / unsuccessful transmitted or received by the adaptor.
Rejected Packets Field: Shows the total amounts of rejected packets been transmitted or received by the adaptor.