Symbol Technologies WS 5000 manual

Page 13

15.For wireless clients using Symbol Technologies adapters, enter a Pass Key value and click Generate. Remember this Pass Key as it will be needed to configure wireless clients. Click Next and skip to step 17.

16.For wireless clients using non-Symbol Technologies adapters, enter a 26- character hexadecimal value for Key#1. Remember this 26-character value as it will be needed to configure wireless clients. Click Next to display the Security Policy confirmation screen.

17.From this Security Policy confirmation screen, click Finish to save the policy and exit the Security Policy Wizard and display the WLAN Wizard screen. The newly created security policy will now be attached to the WLAN.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 72E-66722-01 Revision a December Quick Setup GuidePatents CopyrightConfiguring the WS 5000 and Applying a WEP-128 Policy Connecting the WS 5000 to the NetworkPing xxx.xxx.xxx.yyy Verifying the ConnectionsPasswordsymbolenter Initial Configuration Using the CLIConfiguring Ethernet Ports WS5000.Cfgshow ethernet 2enter To verify information about an Ethernet portBasic WS 5000 Configuration Creating a Policy Using the GUITo create a new Wlan and a security policy To change the Type settingPage Page Page Page Page Page Page Page Page Page To verify that the new policy is working Conclusion
Top Page Image Contents