Samsung HT-XQ100G instruction manual Connecting an External Digital Component, Press Stop button

P.SCAN(Progressive Scan) Function

Unlike regular Interlace Scan, in which two fields of picture information alternate to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information

(all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.

1 Press STOP button.

•If playing a disc, press the STOP button twice so that “STOP”, appears on the display.

2 Press and hold P.SCAN button on the remote control for over 5 seconds.

Connecting External Components ENG

Connecting an External Digital Component

Example: Digital signal components such as a Set-top Box or CD Recorder.

•Pressing and holding the button for over 5 seconds will select "Progressive Scan" and "Interlace Scan" alternately.

•When you select P.SCAN, "P.SCAN" will appear on the display.

•To set P.Scan mode for DivX discs, press the P.SCAN button on the remote control for more than 5 seconds with no disc in the unit (“'NO DISC" on the display), then load the DivX disc and play.

What is Progressive (or Non-Interlaced) Scanning?

Interlaced Scan (1 FRAME = 2 FIELDS) Progressive Scan (FULL FRAME)

Optical Cable

(not supplied)

Audio Cable

(not supplied)

If the external analog

component has only one

Audio Out, connect either left

CONNECTIONS

In interlaced-scan video, a frame consists of two	The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field	video consecutively down the screen, line by line.
contains every other horizontal line in the frame.	An entire image is drawn at one time, as opposed to the
The odd field of alternating lines is displayed first, and	interlaced scanning process by which a video image is
then the even field is displayed to fill in the alternating	drawn in a series of passes.
gaps left by the odd field to form a single frame.	The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains	with moving objects.
two interfaced fields, thus a total of 60 fields are
displayed every 1/60th of a second.
The interlaced scanning method is intended for capturing
a still object.

Note	• This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
	Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
	scan TVs.)

•Depending on the capabilities of your TV, this function may not work.

1 Connect the Digital In (OPTICAL) on the main unit to the Digital Output on the external digital component.

2 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.

•Be sure to match connector colors.

3 Press AUX on the remote control to select ‘D.IN / AUX’ input.

•Each time the button is pressed, the selection changes as follows: D.IN ➝ AUX

•You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD ➝ D.IN ➝ AUX ➝ FM.

Note	• You can connect the Video Output jack on your VCR to the TV, and connect the Audio
	Output jacks on the VCR to this product.

17 18