Samsung HT-Q70 instruction manual Listening to Radio, Presetting Stations

Manual Tuning

Listening to Radio

Presetting Stations ENG

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1Press the FM/XM button to select the FM band.

2 Tune in to the desired station.

1Press the FM/XM button to select the FM band.

Press TUNING/CH	3	Press the FM/XM
2 to select "89.10".		MEMORY button.

Main Unit

Automatic Tuning 1

Automatic Tuning 2

Manual Tuning

When is pressed, a preset broadcast station is selected.

Press and hold TUNING/CH to automatically search for active broadcasting stations.

Briefly press TUNING/CH to increase or decrease the frequency incrementally.

• Refer to Step 2 on page 65 to	• “PRGM” flashes in the display.
automatically or manually tune in
to a station.

1Press the FUNCTION button to select the FM band.

2 Select a broadcast station.

	Press the STOP (		)
Automatic Tuning 1
	button to select
PRESET and then press
button to select the preset station.
	Press the STOP (	)
Automatic Tuning 2
	button to select "MANUAL"

and then press and hold button to automatically search the band.

Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or higher frequency.

4 Press to select preset number.

•You can select between 1 and 15 presels.

Note	• This unit does not receive
	AM broadcasts.

5	Press the FM/XM	6	To preset another
	MEMORY button		station, repeat
	again.		steps 2 to 5.

•Press the FM/XM MEMORY button before ‘PRGM’ disappears from the display.

•‘PRGM’ disappears from the display and the station is stored in memory.

RADIO OPERATION

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

To tune in to a preset station, press on the remote control to select a channel.

65	• Each time the button is pressed, the sound switches between "STEREO" and "MONO".	66
	• In a poor reception area, select MONO for a clear, interference-free broadcast.