Renesas H8S/2615 Series user manual Connecting User System Interface Cable to User System

Fasten the user system interface cable head to the IC socket for an FP-80Q package on the user system with the four screws (M2 x 12 mm; with four flat washers) provided. Each screw should be tightened a little at a time, alternating between screws on opposing corners. Take special care, such as manually securing the IC socket soldered area, to prevent the soldered IC socket from being damaged by overtightening the screws or twisting the components.

Screws (M2 x 12 mm) with flat washers

Cable head

Pin 1

IC socket (IC149-080-017-B5 manufactured by

YAMAICHI ELECTRONICS Co., Ltd.)

User system

Figure 3 Connecting User System Interface Cable to User System

7