Samsung HT-H5200, HT-HS5200 user manual Wireless Network

Settings

6.Repeat Steps 4 and 5 until you have filled in all parameters.

✎✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter

values, select Return ('), and then press the v button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

ĞĞWireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 17)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4.When finished, select Done, and then press the v button. The product verifies the network connection and then connects to the network.

✎✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 17)

1.	In the Network Settings screen, change
	Network Type to Wireless. The product searches
	for and then displays a list of the available
	networks.
2.	Scroll through the list, select the desired
	network or Add Network, and then press the
	v button.
3.	If you selected a network in Step 2, go to Step 6.
	If you selected Add Network, go to Step 4.
4.	Enter your wireless network or wireless router's
	name.
	●● Enter numbers directly using the number
	buttons on your remote control.
	●● Enter letters by selecting a letter with the
	▲▼◀▶ buttons, and then pressing the v
	button.
	●● To display capital letters (or redisplay lower
	case letters if capital letters are displayed),

Select your network type.

Network Type Wireless

Wireless network

✓ si-ap

MIC

KIMING_VTOWER

WPS(PBC) Search

You can connect your BD Home Theater to the

internet. Please select which wireless network to use.

select , and then press the v button.

●● To display symbols and punctuation, select

123#&, and then press the v button. To

redisplay letters, select 123#&, and then

press the v button.

When finished, select Done, and then press the

v button.

5. On the Security method screen that appears,

m Move " Select ' Return

2.Select the desired network, and then press the v button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◀▶ buttons, and then pressing v button.

use the ▲▼ buttons to select the network's

Security method, and then press the v

button. On the next screen, enter your

network's security code or pass phrase.

●● Enter numbers directly using the number

buttons on your remote control.

●● Enter letters by selecting a letter with the

▲▼◀▶ buttons, and then pressing the v

button.

18 - English