Samsung HT-E6750W user manual Connecting the FM Antenna, FM Antenna supplied

Page 18

Connections

CAUTION

If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).

Do not insert any other card except the TX card dedicated to the product.

If you insert a different TX card, you can damage the product and may not be able to remove the card easily. Do not insert the TX card upside down or in the reverse direction.

Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem. The wireless receiving antenna is built into the wireless receiver module. Keep it away from water and moisture.

For optimal listening performance, make sure that the area around the wireless receiver module location is clear of any obstructions. If you hear no sound from the wireless surround speakers, switch the mode to Dolby Pro Logic II.

In 2-CH mode, you will hear no sound from the wireless surround speakers.

NOTE

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.

The maximum transmission distance from the product to the wireless receiver module is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the product and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal.

If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.

Connecting the FM Antenna

FM Antenna (supplied)

SPEAKERS OUT

CENTER

FRONT

FRONT TOP

 

 

 

 

 

 

 

SUBWOOFER

FRONT

FRONT TOP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPEAKER IMPEDANCE : 3

 

iPod

 

LAN

 

WIRELESS

 

HDMI OUT

AUX

IN

1

HDMI IN

2

VIDEO

OUT

FM ANT

OPTICAL

DIGITAL

AUDIO IN

1 . Connect the FM antenna supplied to the FM ANTENNA Jack.

2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

18 English

HT-E6750W_XY_0314.indd 18

2012-03-14 오후 3:41:32

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 1CH Blu-ray Please register your product atSafety Information This symbol indicates importantDisc Storage & Management Using the 3D FunctionImportant Health and Safety Information for 3D Pictures Handling CautionsCopyright LicenceSafety Information English Contents Disk and Format Compatibility Disc types and contents your product can playGetting Started Disc types your product cannot playSupported Formats Region CodeLogos of Discs the product can play Music File SupportWMA Video File SupportLpcm AACAdvanced Video Codec High Definition MPEG4 SP, ASPFor Power cord AccessoriesCheck for the supplied accessories below ASC microphoneFront Panel Rear PanelRemote Control Tour of the Remote ControlIf the TV turns off, the setting is complete Installing batteries in the Remote ControlSetting the Remote Control Remote control will work with Samsung TVs by defaultConnecting the Speakers ConnectionsPosition of the product Installing the Speakers on the Tallboy Stand Speaker ComponentsSWA-5000 Front/Front Top Connecting The SpeakersSpeaker L Speaker RConnecting the FM Antenna FM Antenna suppliedConnecting to an iPod/iPhone Using a USB CableUsing a Dock Connecting to a TV MethodConnecting to External Devices Connecting to a Network Router Wired NetworkWEP OPEN/SHARED, WPA-PSK TKIP/AES, WPA2-PSK TKIP/AES Settings Initial Settings ProcedureEnter numbers by pressing the number buttons on your remote Button You have four choicesPreferences Home ScreenFrom Disc, USB, PC or mobile devices  Selecting an Option on the Home ScreenAccessing the Settings Screen Buttons on the Remote Control Used for the Settings MenuSettings Menu Functions DisplayAudio Network System HDMI-CECSupport Wired Network Configuring Your Network ConnectionAuto Sound Calibration Mode Auto Sound CalibrationWireless Network Wired ManualWpspbc Wireless General Manual Wi-Fi Direct Wi-Fi DirectAllShare Settings Soft APTo Set the Soft AP Security Key By USB Upgrading SoftwareOnline Click Support on the top rightStandby Mode Upgrade By DiscBy downloaded AllShare Play Screen Using the AllShare Play ScreenMedia Play Playing My List ItemsPhotos menu does not support iPods or iPhones Playing Files on a USB Storage Device or iPod/iPhoneIPod/iPhone Models You Can Use With This Product If the connected iPod does not support video playback,Playing Commercial Audio Discs Function ScreenOptions on the Function Screen Playing Commercial Video DiscsPlaying a Disc with User Recorded Content Using the AllShare Network FunctionTo Download the AllShare Software Smart Phone Disc Menu Buttons on the Remote Control used for Video PlaybackControlling Video Playback Title MenuMenu that appears only when a file plays Using the Tools MenuMenu that appears only when BD/DVD disc Plays BonusviewRepeating Tracks on an Audio CD Buttons on the Remote Control used for Music PlaybackControlling Music Playback Shuffling Tracks on an Audio CDUsing Bluetooth What is Bluetooth?Ripping To disconnect the Home Cinema from the Bluetooth device To connect the Home Cinema to a Bluetooth deviceTo disconnect the Bluetooth device from Home Cinema Connect Bluetooth devicePlaying Photo Contents Using the Tools Menu when a File Is HighlightedEarliest to latest date Login / OutEarliest Date MonthlyEdit playlist Button Then pressing the E buttonDevice or to delete a playlist Want to removePresetting Stations Using Buttons on the Remote ControlSetting Mono/Stereo Using the Special Effects Remote Control ButtonsDSP Fitness Gateway to the Unified Self-Care Service Network ServicesUsing Smart Hub Smart Hub at a GlanceUsing the Web Browser Web Browser at a GlanceBD-LIVE Settings AppendixAdditional Information Speaker Settings AllShare Play Playing back a USB Storage DeviceIpod Resolution according to the output mode Bitstream Digital Output SelectionPCM AV receiverTroubleshooting Using the Reset function will erase all stored settings Symptom Check/RemedyAre you using a disc that does not contain menus? Level passwordCheck if the network is stable Symptom Check/Remedy AllShare Play functionThrough AllShare Play Check the connectionSpecifications Subwoofer 200 x 390 x 350 mm Weights 40Hz ~ 160HzH x D AH68-02445L-01

HT-E6750W specifications

The Samsung HT-E6750W is a remarkable home theater system that brings cinematic sound and stunning visuals to your living room. This system is designed for those who appreciate high-quality audio and video experiences without compromising on style or space.

One of the standout features of the HT-E6750W is its 7.1 channel surround sound capability, which offers an immersive audio experience that places the listener at the heart of the action. With a total output of 1330 watts, it provides powerful and dynamic sound suitable for movies, music, and gaming. The system is equipped with premium speakers that include a wireless Bluetooth subwoofer, making it easier to set up without the hassle of additional wires.

The HT-E6750W is also notable for its advanced audio technologies. It utilizes Dolby TrueHD and DTS-HD Master Audio, which deliver high-definition audio for a more accurate sound that retains the richness of the original recording. This home theater system also supports various sound modes, allowing users to tailor the audio experience to their preferences.

In addition to superb audio, the Samsung HT-E6750W is designed for high-definition video playback. It features full HD 3D capabilities, enabling users to enjoy 3D content with stunning clarity and depth. The built-in Smart Hub provides access to movies, TV shows, and various apps directly through the system, enhancing its versatility beyond a traditional home theater setup.

Another significant aspect of the HT-E6750W is its connectivity options. It supports HDMI connectivity, ensuring that users can easily connect their AV devices for seamless integration. The system is also equipped with USB ports and supports a wide range of multimedia formats, allowing you to play your favorite music and videos directly from flash drives or external hard drives.

The design of the HT-E6750W is sleek and modern, complementing any home decor. The wireless capabilities also contribute to a clutter-free setup, allowing for flexible speaker placement without the need for long cables.

In conclusion, the Samsung HT-E6750W offers an impressive combination of features and technologies that cater to both audio and video enthusiasts. With its powerful surround sound, advanced audio codecs, full HD 3D support, and smart connectivity options, it stands as a top choice for anyone looking to upgrade their home entertainment system.
Top Page Image Contents