Samsung HT-DL100 What information can RDS signals provide?, To show the RDS signals

About RDS broadcasting

Using the RDS (Radio Data System) to receive FM stations

RDS allows FM stations to send an additional signal along with their regular program signals.

For example,the stations send their station names,as well as information about what type of program they broadcast, such as sports or music,etc.

When tuned to an FM station which provides the RDS service,the RDS indicator lights up on the display.

¥Description on RDS function

1.PTY (Program Type) : Displays the type of programme currently being broadcast

2.PS NAME (Program Service Name) : Indicates the name of broadcasting station and is composed of 8 characters.

3.RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed of maximum 64 characters.

4.CT (Clock Time) : Decodes the real time clock from the FM frequency.

¥Some stations may not transmit PTY, RT or CT information therefore this may not be displayed in all cases.

5.TA (Traffic Announcement) : When this symbol flashes it shows that the traffic announcement is in progress.

¥ RDS is not available for AM (MW) broadcasts.

¥ RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

What information can RDS signals provide?	RDS Display
You can see the RDS signals the station sends on the display.	1

TO show the RDS signals

Press RDS DISPLAY while listening to an FM station.

Each time you press the button, the display change to show you the following information:

PS (Program Service) : While searching,"PS"appears and then the station names will be displayed."NO PS" appears if no signal is sent.

PTY (Rrogram Type) : while searching,"PTY" appears and then the type of the broadcast program will be displayed. "NO PTY"appears if no signal is sent.

RT(RadioText) : while searching,"RT"appears and then text messages the station sends will be displayed. "NO RT"appears if no signal is sent.

Frequency : station frequency (non-RDS service)

About characters shown in the display

When the display shows PS,PTY,or RT signals,the following haracters are used.

¥The display window cannot differentiate upper case and lower case lrtters and always uses upper case letters.

¥The display window cannot show accented letters, “A,” for instance, may stans for accented “A’s” like “À, Â, Ä, Á, Åand Ã.”

If searching finishes at once,“PS”,“PTY”,and “RT” will not appear on the display.

PTY (Program Type) indication and PTY-SEARCH function

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

To search for a program using the PTY codes

Before you start, remember...

¥The PTY Search is only applicable to preset stations.

¥To stop searching any time during the process, press PTY SEARCH while searching.

¥There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

¥When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.

1 Press PTY SEARCH while listening to an FM station.

2 Press and hold PTY-or PTY+until the PTY code you want appears on the display window, while "PTY SELECT"is flashing.

¥ The display gives you the PTY codes described to the right.

3 Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.

¥The center unit searches 15 preset FM stations,stops

when it finds the one you have selected, and tunes in that station.

DVD	TUNER	AUX	TV
	Band
Title	Menu	Channel
Audio	Subtitle	Volume
MO/ST
Display	Return	Go To	TV/VIDEO
	DVD/CD/TUNER
Down	Tuning		Up
	Enter
	Volume		+	1,3
DSP Mode	Effect	Mute	Sleep
RDS Display		TA	Sound Edit
1	2	3
PTY-	PTY Search	PTY+	SPK Mode
4	5	6
7	8	9	Pro Logic
Slow		Setup	Test Tone	2
	0
Angle	TV System	D.R.C	Clear
	Zoom
Repeat	Repeat	Program	Step
	A B
		Remain	Echo

33 34