Samsung HT-DB1750, HT-DB750, HT-DB1850 Auto Sound Calibration Setup, Press ASC button, Plug

Page 26

Auto Sound Calibration Setup

* This function is available only for DVD/CD playback.

Auto Sound Calibration

By setting the auto sound calibration function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create 5.1-channel sound field optimized for the listener's environment.

* The following images are for illustrative purposes only and may differ from the actual product.

Auto Sound Calibration

Microphone

L: Front Speaker (L)

R: Front Speaker (R)

C: Center Speaker

SW: Subwoofer

LS: Rear Speaker (L)

RS: Rear Speaker (R)

Note • If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without connecting the auto sound calibration microphone will display the message "PLEASE SET ASC FUNCTION FIRST" in the display.

•Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume using the volume control buttons.

•If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled.

 

 

Plug

the auto sound calibration

 

 

 

microphone into the auto sound

 

 

1 calibration input jack.

 

 

 

Place the auto sound calibration

 

 

2 microphone at the listener's position.

 

3

 

Adjust the volume control on the main

 

•

unit as follows:

 

If the distance between the listener and the speaker is over 5 m:

 

 

 

•

Set the main unit's volume to over 25.

 

 

 

If the distance between the listener and the speaker is 3 to 5 m:

 

 

 

 

Set the main unit's volume to 25.

 

 

 

• If the distance between the listener and the speaker is below 3 m:

 

 

 

 

Set the main unit's volume to 15.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

Press ASC button.

 

 

•

The tone will be output twice, in the given order (L ➝ C ➝ R ➝ RS ➝

 

 

•

LS ➝ SW), and 5.1-channel sound field is optimized automatically.

 

 

 

The auto sound calibration setup takes about 2 minutes to complete.

 

 

 

 

SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

A bell will sound and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the setup finishes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A tone is output.

 

 

 

A result for each speaker is displayed.

 

When the message "REMOVE MIC"

5 appears in the display, unplug the auto sound calibration microphone.

To Turn On or Off Sound Logo

When you turn on the power, the unit produces a sound logo after the disc reading to notify that the unit is optimized for playback.

1 Press and hold ASC button.

•"S.LOGO ON" or "S.LOGO OFF" appears in the display.

2 Briefly press ASC button.

 

• Each time the button is pressed, the selection alternates

49

between S.LOGO ON and S.LOGO OFF.

• If you select "S.LOGO ON", a sound logo will be output

when the disc reading is finished after power-on. If you

select "S.LOGO OFF", no sound logo will be output.

To Verify the Auto Sound Calibration

1 Press and hold ASC button twice.

•"ASC CHECK" appears in the display.

2 Briefly press ASC button.

•Distance and level values specified for each channel will appear in the display.

To cancel the auto sound calibration setup, press ASC button.

•The tone output stops, "CANCEL ASC" appears in the display followed by "REMOVE MIC", and the setup will be cancelled.

To listen in the auto sound calibration mode, briefly press ASC button.

(If you set the auto sound calibration in the order from 1 to 4 above for the first time)

•The selection alternates between ASC ON and ASC OFF in the display.

•If you select "ASC ON", you can listen in the auto sound calibration mode.

If you select "ASC OFF", you can listen in the mode set in the audio setting of the setup screen.

50

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Digital Home Cinema System Safety Warnings Precautions Class 1 Laser ProductContents CD-R Discs Copy ProtectionDisc Size Max. Playing Time CD-R MP3 DiscsDescription Insert Remote Batteries Replace the battery coverRange of Operation of the Remote Control Insert two 1.5V AAA batteries, payingConnecting the Speakers Outputs do not feed any signals Connecting the Video to TVPlease observe the following cautions for your safety Cooling FanPress AUX on the remote control to select AUX 1 or AUX Connecting an External Digital ComponentConnecting an External Analog Component Disc Playback Press TV/VIDEO button to select Video modeWith a Single Remote Control Selecting the Video FormatPress the Remain button Displaying Disc InformationPress Info button Each time the Remain button is pressedPress and hold Fast/Slow PlaybackSkipping Scenes/Songs Briefly pressRepeat Playback Button Angle FunctionZoom Function Press Enter buttonPress the numeric buttons 1Press Info buttonButtons to select the desired subtitle Press Menu button to exit the setup screen Using Disc MenuUsing the Title Menu Press Menu buttonButton Setting the LanguagePress Menu 43LB Adjusting the TV Aspect Ratio Screen SizePress Menu button 43PSSetting Parental Controls Rating Level Enter the password Then press Enter buttonSetting the Password Press Cursor button toTo Change the Wallpaper Setting the Wallpaper Jpeg DVD VCDPress Return button to return to the previous level Press OPEN/CLOSETo end the test tone, press Test Tone button Setting the Speaker Mode Setting the Test TonePress Test Tone button ‘Audio’ and thenPress Cursor button Setting the Delay TimePress Cursor , 5 totime.set the Delay To move to ‘Audio’‘Audio’ and then press Setting the Audio QualityPress Sound Edit button and then press Cursor Enter buttonSetting the DRC Dynamic Range Compression Plug Auto Sound Calibration SetupPress ASC button Press SUPER5.1 Magic Sound Field ModeMagic Headphone Function Dolby Pro Logic II Mode Dolby Pro Logic II EffectTune in to the desired station Listening to Radio Presetting StationsRemote Control Unit 1TUNERBAND button and select the FM bandPress Sleep button To confirm the sleep timer setting, press Sleep buttonConvenient Functions Press Dimmer buttonWhen operating the TV with the remote control Press the Mode button to make the TVIndicator on the remote control to flash Before Calling for Service Symptom Check/RemedyDirect sunlight Ventilated area SpecificationsDo not keep Keep in a cool 296 x 390 x 360 mm Weights1ch speaker system 2Kg

HT-DB1850, HT-DB1750, HT-DB750 specifications

The Samsung HT-DB750, HT-DB1750, and HT-DB1850 are a trio of innovative home theater systems designed to deliver immersive audio and visual experiences. Each model brings unique features, technologies, and characteristics that cater to various entertainment preferences.

The Samsung HT-DB750 stands out with its powerful 5.1 channel configuration, offering an impressive output that turns any room into a cinema-like experience. This model is equipped with a built-in DVD player and features Dolby Digital and DTS decoding, ensuring high-quality sound reproduction with seamless audio clarity. The wireless rear speakers further enhance the convenience of setup while minimizing cable clutter. The HT-DB750 also supports various media formats and includes USB connectivity for easy access to external drives and devices.

The HT-DB1750, while more compact, doesn't compromise on performance. This system also boasts a 5.1 channel surround sound configuration, making it ideal for smaller spaces without sacrificing audio quality. Equipped with Samsung's proprietary technologies, the HT-DB1750 features Smart Volume, which automatically adjusts volume levels across different content for a consistent listening experience. Additionally, users can take advantage of its HDMI input for high-definition video and audio transmission, ensuring an integrated home entertainment setup.

Rounding out the trio, the HT-DB1850 offers an advanced audio experience with its sleek design and powerful acoustic output. This system combines the same 5.1 channel setup with the added advantage of an integrated Blu-ray player, enabling playback of high-definition video formats. The HT-DB1850 features crystal-clear audio with its ability to decode various audio formats, including Dolby TrueHD, providing audiophiles with rich, detailed sound. It also supports 3D video playback, enhancing the visual feast for movie lovers.

All three models come with user-friendly remote controls and on-screen menus, making navigation simple and intuitive. Each system is designed to complement Samsung’s suite of products, ensuring a seamless experience when integrated with TVs and other devices. With sleek aesthetics, robust performance, and cutting-edge technologies, the Samsung HT-DB750, HT-DB1750, and HT-DB1850 continue to be popular choices for those seeking high-quality home theater systems that elevate their entertainment experience.
Top Page Image Contents