Powerware 5140 warranty Technical Specifications1, Lcd

Technical Specifications1

Advanced Battery Management (ABM™) Technology Doubles Battery Service Life

The lead-acid batteries typically used in a UPS are considered viable as long as they can maintain backup times of at least half that of new batteries. The illustration to the right shows that batteries that are constantly trickle charged (as are virtually all other UPS batteries on the market today) reach the end of their useful life in less than half the time of batteries charged using ABM. ABM uses a patented three-stage charging technique that not only doubles battery service life, but also optimizes battery recharge time and provides up to a 60-day advanced notifi- cation of pending end of useful battery life.

E L E C T R I C A L IN P U T

Data based upon tests performed by an independent battery manufacturer.

C O M M U N I C AT I O N S

Voltage	200, 208, 220, 230, & 240 Vac user-selectable;
	see Model Selection Guide for default settings
Normal Voltage	±20% of nominal voltage without using batteries
Range
Extended Voltage	160-288V without using batteries (set via front panel)
Range
Frequency	50/60 Hz, ±3 Hz (+5/-3 Hz with extended voltage range)
Connection	Hardwired
Efficiency	96%
E L E C T R I C A L OU T P U T
Power Out	6000 VA/6000 Watts
Voltage Range	±10% of nominal voltage
(online)
Voltage Range	±5% of nominal voltage
(on battery)
Wave Form	Sine Wave
(on battery)
Frequency	Same as input (±0.5% during battery operation)
Connections	Receptacles or hardwired; see Model Selection Guide
Max Current	29A at 208 Vac; 26A at 230 Vac
Output Protection	Resettable circuit breakers
B AT T E R Y
Type	Maintenance-free, sealed, valve-regulated lead-acid
	(VRLA), (28), 12V 5 AH
Extended Batteries	Maximum of 2 Extended Battery Modules (EBMs)
Backup Time	See Battery Run Times table
Recharge Time	<3 hours to 80% usable capacity
Extended Battery	<10 hours to 80% usable capacity
Recharge Time

Serial Ports	(2) Serial communication ports for use with power
	management software and installable option cards,
	including ConnectUPS SLC-EM SNMP Adapter and the
	Port Expander Card
User LEDs	Normal Operation (green), On Battery (yellow),
	On Bypass (yellow), and Alarm (red)
LCD	Two-line LCD with three button control
LCD Languages	Danish, Dutch, English, French, German, Spanish,
	Italian, and Japanese
Front Panel Buttons	On, Off, and Alarm Silence/Self Test
Communications	6-foot communication cable included
Cable

E N V I R O N M E N TA L AN D SA F E T Y

Operating	10°C to 40°C (25°C for optimal performance)
Temperature
Transit Temperature	-20°C to 55°C
Storage Temperature	0°C to 25°C
Humidity (Operation)	20 to 80% (noncondensing)
Humidity	5 to 95%
(Non-operating)
Operating Altitude	0 to 10,000 feet (non-operating: 0 to 30,000 feet)
Audible Noise	55 dBA at 1 meter
Safety Markings	UL, CSA, NOM. Models PW5140 6000i and
	PW5140 6000 HW also CE and VDE
Safety	UL1778; CSA22.2 No.107.1,No.107.2,No.950; CB
Certifications	Bulletin No.86AI; EN50091-1; EN60950;
	EMKO-TSE207/95; NOM-019-SCFI-1993
EMC Markings	FCC-A; CISPR-A; VCCI
Immunity	IEC 801-2, IEC 801-3, IEC 801-4, IEC 801-5
Surge Suppression	Conforms to IEEE 587B and ANSI C62.41
REPO Port	Meets NEC code 645-11 intent and UL requirements

1.Due to continuing product improvement programs, specifications are subject to change without notice.