Planet Technology FSD-800, FSD-1600, FSD-801, FSD-1601SC, FSD-1601 ST manual Application, Off

DIP 10: Turns on for VLAN tag priority QoS.

The connected end-nodes (PCs, Routers) should also support

VLAN priority or ToS priority. Normally, these functions could

 NOTE: turn off by default. Check the user’s guide of your networked device for this capability.

3.2.5 Port-based priority

Related DIP: 11, 12

Default meaning: No hardware port priority.

If your end-nodes do not support priority, and you would like to preserve more bandwidth for those network users, port-based priority will direct set the related port to high priority.

DIP 11	DIP 12	Description
ON	OFF	Port 1 and Port 2 are high priority ports
OFF	ON	Port 1~ 4 are high priority ports
ON	ON	Port 1 ~8 are high priority ports

NOTE:

NOTE:

FSD-1600/1601 only support dual priority, this means the priority only will be HIGH or LOW no matter which port you connected to.

Priority support can co-work with VLAN.

3.3 Application

3.3.1 Basic 100Mbps Server, PCs to 10/100Mbps Switch

Plug one end of the Category 5 UTP Cable into any one port of the Switch, and the other end of this cable into the RJ-45 of Fast Ethernet Adapter in the server or PC. The cable length between these 2 connecting points should not exceed 100 meters.

11