Planet Technology GSD-1020 Installation, Before start up, Connecting end node, hub or switch

Page 7

3. INSTALLATION

3.1 Before start up

Before your installation, please refer to the followings for your cabling:

100Base-TX

All 100Base-TX ports come with auto-negotiation capability. They automatically support 100Base-TX and 10Base-T networks. Users only need to plug a working network device into one of the 100Base-TX ports, then turn on the Switch. The port will automatically runs in 10Mbps, 20Mbps, 100Mbps or 200Mbps after the negotiation with the connected device.

1000Base-T

The Switch are with two Gigabit port. This two ports support 10Mbps, 100Mbps and 1000Mbps speed and also are full-duplex supported.

Cabling

Each 10/100/1000Base-T ports use RJ-45 sockets -- similar to phone jacks -- for connection of unshielded twisted-pair cable (UTP). The IEEE802.3ab Gigabit Ethernet standard requires 4-pair Category 5/5e UTP cable. IEEE 802.3u Fast Ethernet standard requires Category 5 UTP for 100Mbps 100Base-TX. 10Base-T networks can use Cat.3, 4, or 5 UTP (see table below). Maximum distance is 100meters (328 feet).

Port Type

Cable Type

Connector

 

 

 

10Base-T

Cat 3, 4, 5, 2-pair

RJ-45

 

 

 

100Base-TX

Cat.5 UTP, 2-pair

RJ-45

 

 

 

1000Base-T

Cat. 5/5e UTP, 4-pair

RJ-45

 

 

 

Any Ethernet devices like hubs/ PCs can connect to the Switch by using straight-through wires. The eight 10/100Mbps port and two 1000Base-T are auto-MDI/ MDI-X can be used on straight-through or crossover cable.

3.2Connecting end node, hub or switch

1.Place the Switch on a smooth surface or fasten the mounting brackets purchased separately with the provided screws in a standard 10”/19” rack.

2.Connect the power cord to the power inlet socket of Switch and the other end into the local power source outlet.

3.Connect other switch or PC to one port of the GSD-1020 using Category 3/4/5 UTP/STP cabling.

4.Connect another switch or PC to the other port of Switch by following the same process as described in Step3.

- 4 -

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 10/100/1000Mbps Gigabit / Fast Ethernet Switch Revision TrademarksDisclaimer FCC Warning CE Mark WarningTable of Contents Check the contents of your package for following parts ChecklistAbout the Switch Features100Base-TX LED indicators SystemHardware Description Front Panel1000Base-T Rear PanelCabling InstallationConnecting end node, hub or switch Before start upCable distance for Switch Connecting to Network Backbone or ServerMake sure the wiring is correct Address Table Switch OperationLink LED is not lit TroubleshootingPerformance is bad RJ-45 cable pin assignment Switch‘s RJ-45 Pin AssignmentsAppendix a Networking Connection 10/100Mbps / 10/100Base-TXGSD-1020 10/100/1000Mbps Gigabit Fast Ethernet Switch Appendix B Technical Specifications

GSD-1020 specifications

Planet Technology GSD-1020 is a cutting-edge device designed to meet the increasing demands of modern networking environments. As part of Planet Technology's extensive lineup of networking solutions, the GSD-1020 is particularly tailored for small to medium-sized businesses, offering a versatile and reliable switch that enhances productivity and streamlines communication.

One of the standout features of the GSD-1020 is its support for 10 Gigabit Ethernet connectivity, which provides lightning-fast data transmission. This enables organizations to manage heavy data loads efficiently and ensure seamless application performance. With multiple 10G SFP+ ports, the switch allows for flexible network architecture, accommodating various setups and configurations to suit specific business needs.

In terms of design, the GSD-1020 is built with robust hardware to withstand diverse operating conditions. Its metal chassis not only provides durability but also aids in effective heat dissipation. The switch supports both standard and PoE (Power over Ethernet) configurations, enabling it to power connected devices such as IP cameras, phones, and wireless access points directly through the Ethernet cable, simplifying installation and reducing cable clutter.

The GSD-1020 incorporates advanced Layer 2 switching features, ensuring that data packets are prioritized and efficiently directed to their destinations. With features such as VLAN support and port mirroring, the switch enhances network management and security while allowing for efficient traffic segmentation. This is particularly beneficial for businesses with varying network requirements, as it permits greater control over data flow.

Another significant aspect of the GSD-1020 is its energy efficiency. Designed in compliance with the IEEE 802.3az Energy-Efficient Ethernet standard, the switch minimizes power consumption without compromising performance. This not only reduces operational costs for organizations but also supports environmental sustainability initiatives by lowering the carbon footprint.

Planet Technology GSD-1020 is easy to manage and configure, featuring a user-friendly web interface that simplifies the setup process. This intuitive management system allows IT professionals to monitor the network status, configure settings, and troubleshoot issues with minimal effort, making it accessible even for those with basic technical knowledge.

Overall, the Planet Technology GSD-1020 stands out as a powerful and versatile networking solution. Its combination of high-speed connectivity, robust design, advanced management features, and energy efficiency makes it an ideal choice for businesses looking to enhance their network infrastructure while ensuring reliable performance and future scalability.
Top Page Image Contents