playback
DISC PLAYBACK
ENG
B
1. Load a disc vertically into the Disc Insert Hole.
~ Place a disc gently into the tray with the disc’s label facing up.
. Close the compartment by pressing the PLAY (
) button.
~Playback starts automatically.
To stop playback, press the STOP (@) button during playback.
~If pressed once, PrESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY (
) button or ENTEr button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
~If pressed twice, STOP is displayed, and if the PLAY (
) button is pressed, playback starts from the beginning.
To temporarily pause playback, press the PAUSE (
) button during playback.
~To resume playback, press the PLAY (
) button again.
M ` You can use the product in either vertical or horizontal position. If you select to use it either vertically or horizontally, The operation (Previous / Next) of the [ or ]button will be automatically adjusted to the applicable position.
`Depending on the content of the disc, the initial screen may appear different.
`Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) recommendations.