TDK iHA48060A012V specifications Thermal Performance, 100 110 120

Advanced Data Sheet: Veta® iHA48060A012V*, 1.2V/60A Output Half Brick

Thermal Performance:

	60
	50
( A )	40
n t
C u r r e
t p u t	30
O u
	20
	10
	30	40	50	60	70	80	90	100	110	120
					Ambient Temperature ( o C)
	NC (0.3 m/s, 60 LFM)				1.0 m/s (200 LFM)			2.0 m/s (400 LFM)
	IMS LIMIT < 1.0 m/s (200 LFM)				IMS LIMIT => 1.0 m/s (200 LFM)

iHA48060A012V-001 maximum output current vs. ambient temperature at nominal input voltage for airflow rates natural convection 0.3 m/s (60lfm) to 3.0m/s (600lfm) with airflow from output to input.

iHA48060A012V-001 maximum output current vs. ambient temperature at nominal input voltage for airflow rates natural convection 0.3 m/s (60lfm) to 3.0m/s (600lfm). Airflow from Vout (+) to Vout (-) with the module output side on the left.

The thermal curves provided are based upon measurements made in TDK Innoveta’s experimental test setup that is described in the Thermal Management section. Due to the large number of variables in system design, TDK Innoveta recommends that the user verify the module’s thermal performance in the end application. The critical component should be thermo-coupled and monitored, and should not exceed the temperature limit specified in the derating curve above. It is critical that the thermocouple be mounted in a manner that gives direct thermal contact otherwise significant measurement errors may result.

©2007 TDK Innoveta Inc.	' (877) 498-0099
iHA Datasheet 040207	10/16