Quantum 3.5.1 Resetting a Schedule, From the StorNext Home Page , select Schedule Events from

Chapter 4 Common StorNext Tasks

Scheduling StorNext Events

	2	Select an event type:
		•	Clean Info
		•	Clean Versions
		•	Full Backup
		•	Health Check
		•	Partial Backup
		•	Rebuild Policy
	3	Click Configure. The second Schedule Events screen displays the
		selected event type and any existing schedules (figure 37).
	4	Select the schedule you want to change, and then click Delete.
			Caution: After you click Delete you will NOT be asked to
			confirm that you want to delete the schedule. DO
			NOT click Delete unless you are absolutely certain
			you want to delete the schedule.
	5	When the Status screen displays Success, click Close.
	6	Do one of the following:
		• Click Cancel to exit the screen. The Schedule Events window
			closes.
		• Click Back to return to the previous screen.
	The Reset function deletes ALL existing schedules for an event type and
Resetting a Schedule
	creates one schedule that uses default values. The procedure for resetting
	schedules for an event is the same regardless of the event type.
	1	From the StorNext Home Page, select Schedule Events from the
		Admin menu. The first Schedule Events screen appears (figure 36).
	2	Select an event type:
		•	Clean Info
		•	Clean Versions
		•	Full Backup
		•	Partial Backup

StorNext User’s Guide 66