INSTALLATION
Hook-up
TSMS-2150X-8AUV MULTI SWITCH
UHF/VHF ANTENNA
DSS DISH
AND LNB
LNB RHCP | ANT | LNB LHCP | 24VDC | OUT | OUT | OUT | OUT | OUT | OUT | OUT | OUT |
600mA | |||||||||||
(13/148V) | IN | (17/18V) |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
| TSDM ANT/SAT |
|
|
|
|
|
|
|
|
|
|
| DIPLEXER |
|
|
|
|
|
|
|
|
|
|
|
|
| TV |
| TV |
| TV |
| TV |
TV | SAT TV | SAT TV | SAT TV | SAT |
SAT RECEIVER SAT RECEIVER SAT RECEIVER SAT RECEIVER | ||||
RECEIVER | RECEIVER | RECEIVER | RECEIVER |
|
1.Connect the RHCP LNB output and the LHCP LNB output to the RHCP(13/14V) and LHCP(17/18V) inputs respectively of the
3.Connect the broadband antenna to the ANT IN on the back of the unit.
4.Connect each of the output ports on the back of the unit to a TSDM antenna/satellite diplexer. Connect the TSDM output port to the appropriate input, tv and/or receiver If a broadband antenna is not used then omit the TSDM diplexer and connect the receivers directly to the
5.Plug the wall adaptor 3.5mm plug into the jack located in the back of the unit. Plug the adaptor into a 120Vac, 60Hz wall receptacle.
6.Each of the satellite receivers can select programs in either right or left hand circular polarities. To select a right hand circular polarity, a 13/14 DC voltage is used and to select a left hand circular polarity, a 17/18 DC voltage is used.
4
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818)