Samsung HT-DL105 Listening to the Radio, Presetting stations, To store other Channels

Listening to the Radio

You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation.

B

Presetting stations

You can store up to:

15	FM stations	• FM	Frequency Modulation
8 MW stations		• AM(MW)	Medium Wave
7	LW stations	• LW	Long Wave

GB

Example: Presetting FM 89.1 in the memory

Remote

Control

Unit

1

Press the Tuner(Band) button.

2

Select a broadcast station.

1

Press the Tuner(Band) button and select the FM band.

2

Select the MANUAL by pressing the Stop ( ) button

3

Use the ▲▲ and ▲▲ button to tune into 89.1

•The selection toggles back and forth between "FM" "MW" and "LW" each time the Tuner(Band) button is pressed.

Auto Station 1

Auto Station 2

Manual Station

When the button is pressed, a preset broadcast station is selected.

Hold in the button. Automatic searching begins, and then stops when a station is tuned in.

Press the button to tune to the chosen station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

on the main unit.

•The selection toggles back and forth between " " each time the Tuner(Band) button is pressed.

MHZ MHZ

L R L R L R

Main Unit

1

Press the Function button to select the desired band (FM, MW or LW).

2

Select a broadcast station.

Auto Station 1 Press the Stop (	) button to select the PRESET
mode. Then press the		button to select a

station stored in the preset

4

Press the Program button on the remote control, FM1 will flash. If you want to save 89.1 to FM1, press Program again.

PROGRAM MHZ

L R

5

If you want to save 89.1 to another preset location(FM2~FM15), press ▲▲ or ▲▲ , then press

Program to save it to that location.

	PROGRAM	MHZ
L	R

6

To preset other stations, follow steps 1~4 again.

To Listen in Mono/Stereo

Press the MO/ST button. (only FM)

Auto Station 2

Manual Station

Audio

MO/ST

Press the Stop ( ) button to select the MANUAL mode on the front panel. Then hold in the button to make the unit begin automaticall searching for broadcast stations.

Press the Stop ( ) button to select the MANUAL

mode front panel. Press the button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed.

	MHZ
L	R

To store other Channels	To tune in a preset station
Follow steps 3~5 again.	See the previous page.

•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.

•In a poor reception areas, select Mono mode for a clear, interference-free broadcast.

39 40