CS580 EN 6/10/04 2:25 PM Page 18
Settings
EN Showing Demonstration
Press DEMO/DIMMER to turn on/off demonstration mode. The demonstration scrolls through all display operations.
Setting the Clock
1.Press and hold CLOCK until the hour flashes on the display.
0:00
CLOCK SET
2.Press SKIP BACKWARD 
or SKIP
FORWARD 
to select the hour.
3.Press CLOCK to shift to minute digits.
4.Follow step 2 to set the minute digits.
5.Press PROG/SET to confirm and save settings. Press STOP 
to quit setting.
Note:
When system is ON, you can press CLOCK to display the current time (CURR TIME) for about 2 seconds.
Setting the Timer
1.Press and hold TIMER until ON 0:00 appears with the hour flashing
(ON - timer on time).
ON 0:00
ALARM SET
2.Press SKIP BACKWARD 
or SKIP FORWARD 
to select the hour.
3.Press TIMER to shift to minute digits.
4.Repeat step 2 to select minute digits.
5.Press TIMER to shift to timer off time setting. OF 0:00 (timer off time) will show on the display with the hour flashing.
6.Repeat steps 2 to 4 for timer off time setting.
7.Press TIMER to select source.
8.Press SKIP BACKWARD 
or SKIP FORWARD 
to select among TUNER / TAPE / CD MODE / REC TUNER.
9.Press TIMER to set volume.
10.Rotate the VOLUME knob to set the desired volume level.
11.`Press PROG/SET to confirm and save settings. Press STOP 
to quit setting.
Activating the Timer
Press and release TIMER to activate and
deactivate the timer. 
lights when the timer is activated.
13 