SUPER MICRO Computer X8DA3 Security Settings, Clear event log, Supervisor Password, User Password

X8DA3/X8DAi User’s Manual

Clear event log

This option clears the Event Log memory of all messages. The options are OK and Cancel.

4-4 Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set first.

Supervisor Password

This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password has not been used.

BIOS SETUP UTILITY

	Main	Advanced		Security	Boot	Exit
	Security Settings						Install or Change the
							password.
Supervisor Password : Not Installed
User Password			: Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection				[Disabled]
							￿	Select Screen
							￿￿	Select Item
							+-	Change Field
							Tab	Select Field
							F1	General Help
							F10	Save and Exit
							ESC	Exit

vXX.XX (C) Copyright 1985-2009, American Megatrends, Inc.

User Password

This item indicates if a user password has been entered for the system. "Not In- stalled" means that a user password has not been used.

Change Supervisor Password

Select this feature and press <Enter> to access the submenu, and then enter a new Supervisor Password.

User Access Level (Available when Supervisor Password is set as above)

Use this feature to set the user's access level. The options are:

•

•

•

•

Full Access: grants full User read and write access to the Setup Utility,

View Only: allows access to the Setup Utility, but cannot change the fileds,

Limited: allows only limited fields to be changed such as Date and Time,

No Access: prevents User access to the Setup Utility.

4-20