Spark Tech WX-6615 manual Security

Page 11

WWW.SparkLAN.com

4.2. Security

Router Password: Changing the password for the AP Router is as easy as typing the password into the Enter New Password field. Then, type it again into the Re -enter to confirm.

* Click the Apply button to save the setting.

Use the default password when you first open the configuration pages, after you have configured these settings, you should set a new password for the Router (using the Security screen). This will increase security, protecting the Router from unauthorized changes.

VPN Pass-Through:Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the Router supports IPSec Pass-Through, L2TP Pass-Through, and PPTP Pass- Through.

∙IPSec - Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec tunnels to pass through the Router, IPSec Pass-Through is enabled by default. To disable IPSec Pass-Through, uncheck the box next to IPSec.

∙L2TP - Layer 2 Tunneling Protocol is a protocol used to tunnel Point-to-Point Protocol (PPP) over the Internet. To allow L2TP tunnels to pass through the Router, L2TP Pass-Through is enabled by default. To disable L2TP Pass-Through, uncheck the box next to L2TP.

∙PPTP - Point-to-Point Tunneling Protocol is the method used to enable VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP tunnels to pass through the Router, PPTP Pass-Through is enabled by default. To disable PPTP Pass-Through, uncheck the box next to PPTP.

Web Filters: Using the Web Filters feature, you may enable up to four different filters.

User’s Guide

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Version Wireless 802.11g AP Router WX-6615Copyright statement Contents Introduction Safety Notification Front Panel Hardware InstallationTurn on Power Supply Web Management Settings Make Correct Network Settings of Your Computer SetupInternet IP Address and Subnet Mask Automatic Configuration Dhcp Static IP∙ Default Gateway ∙ User Name and Password4GHz Settings Security User’s Guide System To upgrade the Routers firmware耟Click More Info.耟 For Windows 98 and Millennium耟User’s Guide 192.168.1.100 DhcpUser’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Filters Internet Access PolicySummary ICMP, UDP, TCP, or UDP & TCPUser’s Guide User’s Guide Port ForwardingUser’s Guide Routing, Destination RoutingDynamic Routing StaticShow Routing Table Delete This Entry Click the Delete This Entry buttonClick the Show Routing Table DynDNS.org DdnsBasic Functions TroubleshootingMy Wireless AP Router will not turn on. No LED’s light up LAN Connection Problems I can’t access my AP RouterUser’s Guide
Top Page Image Contents