Sunix RS-232/422/485, Universal PCI/PCI Express Industrial Multiport Serial Cards ~ ttySMX15

SUNIX NCCI Co., Ltd.

TEL : +886-2-8913-1987

Email : info@sunix-ncci.com.tw

If there are more than two boards installed, device nameing convention table as below.

Board Number	Device Name
1st board	ttySMX0	~ ttySMX7
2nd board	ttySMX8	~ ttySMX15
3rd board	ttySMX16 ~ ttySMX23
4th board	ttySMX24 ~ ttySMX31

7.To dump information for those serial ports, do command as below

# smxdump

This will show the info about those serial ports, the result should be like this

================ Found 6 SUNIX port, list informations below ===============

ttySMX0 --

RS-232 (bus:2 device: 1) , base address = a000, irq = 169

ttySMX1 --

RS-232 (bus:2 device: 1) , base address = a008, irq = 169

ttySMX2 --

RS-232 (bus:2 device: 1) , base address = a010, irq = 169

ttySMX3 --

RS-232 (bus:2 device: 1) , base address = a018, irq = 169

ttySMX8 --

RS-422/485 (bus:2 device: 2) , base address = a800, irq = 177

ttySMX9 --

RS-422/485 (bus:2 device: 2) , base address = a808, irq = 177

======================================================================

8.To build softlink for device node, do as below

# snxlink

9.Use snxterm to test those installed serial ports.

# snxterm