4. Enter your subnet mask in the Subnet Mask field.
5. Click the OK button to apply changes.
Scenario C: Connecting the SonicWALL SSLVPN 4000
To connect the SonicWALL SSL VPN 4000 using Scenario C, perform the following steps:
1.Connect one end of a crossover cable to an unused port on your LAN hub or switch.
Scenario C: SSL VPN on the LAN
Gateway Device
Switch/
Hub
Internet connectionLAN port
| SonicWALL |
| X0 |
Remote Users | Network Nodes |
| |
Internet Zone | LAN |
|
2.Connect the other end of the crossover cable to the X0 port on the front of your SonicWALL SSL VPN 4000. The X0 Port LED lights up green indicating an active connection.
Continue to Step
Page 20