Power over Ethernet, BL-8551HW Single Port

Power over Ethernet

The AeroGuard™ AGN1200 Series AP supports both local D.C. input power (adapter included) and Power over Ethernet. This gives you flexibility in approaching an installation to support either a wired or wireless backhaul network design. For a PoE installation, please review the following guidelines to assist in the solution:

•The AGN1200 Series AP is fully 802.3af compliant.

•Pre-test the PoE injector: make sure to pre-test a PoE vendor’s solution with the AeroGuard™ MIMO AP to make sure there is full compatibility. Having 802.3af compliance does not insure compatibility as some PoE vendors may modify their implementation to meet the requirements of specific AP vendors.

•SOHOware’s recommendation: SOHOware has tested and confirmed that the following PoE vendor’s injector is fully compatible with the AGN1200 Series AP:

Source: Red Hawk / CDT

Model: BL-8000 PowerSense Series

www.red-hawk.com

BL-8551HW Single Port

•Consult the manufacturers instructions regarding cabling, device location and other factors for installation.

•For Red-Hawk, select the model with the desired number of ports. Note, select the specific models that support “higher wattage” devices (ie, 20 Watts).

BL-8520 20 Port Chassis