CS300 EN 11/20/02 10:19 AM Page 13
Tape Player
Playing a Tape
1.Press SOURCE on the main unit repeatedly or TAPE on the remote to enter Tape mode.
2.Press on the PUSH OPEN/CLOSE area of the cassette door to open it.
3.Insert a tape into the door and push the door closed. VFD will display “CA 0000”.
4.Press SKIP BACKWARD 
or SKIP
FORWARD
on the main unit to rewind and fast forward tape to position the tape to the desired starting position.
5.Press PLAY/PAUSE 
to begin playback. Press again to pause playback.
From CD | EN |
1.Insert a tape into deck .
2.Press SOURCE repeatedly on the main unit to select CD then press DISC SKIP or DISC1 / DISC2 / DISC3 to select the disc to be recorded.
3. Press SKIP FORWARD 
or SKIP
BACKWARD 
on the main unit or
TUNING - 
or +
on the remote control to select the track to be recorded.
or Press PROG•SET to enter program mode.
4.Press REC •II to enter Record standby. Press again to begin recording.
5.press STOP 
to end recording.
From AUX
1.Insert a tape into tape deck.
2.Check that the auxiliary device has been connected correctly to the AUX connector on the back of the system.
3.Start playback on the auxiliary device.
4.Press REC•II to enter Record standby. Press again to begin recording.
5.Press STOP 
to end recording.
Recording
From Tuner
1.Insert a tape into deck.
2.Press SOURCE repeatedly on the main unit or TUNER on the remote control to select Tuner (TU).
3.Press BAND/APP to access the desired band.
4..Press SKIP FORWARD 
or SKIP
BACKWARD 
on the main unit or
TUNING - 
or +
on the remote control to tune to the station to be recorded.
5.Press REC •II to enter Record standby. Press again to begin recording.
6.press STOP 
to end recording.
9