SMC Networks SMC2835W manual

Page 31

Ethernet - A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10 million bits per second (Mbps).

ESS - ESS (ESS-ID, SSID) stands for "Extended Service Set". More than one BSS is configured to become an Extended Service Set. LAN mobile users can roam between different BSSs in an ESS (ESS-ID, SSID).

Fast Ethernet NIC - Network interface card that is in compliance with the IEEE 802.3u standard. This card functions at the media access control (MAC) layer, using carrier sense multiple access with collision detection (CSMA/CD).

Fixed IP – (see Static IP)

Full-Duplex - Transmitting and receiving data simultaneously. In pure digital networks, this is achieved with two pairs of wires. In analog networks, or digital networks using carriers, it is achieved by dividing the bandwidth of the line into two frequencies, one for sending, one for receiving.

Hub - Central connection device for shared media in a star topology. It may add nothing to the transmission (passive hub) or may contain electronics that regenerate signals to boost strength as well as monitor activity (active/intelligent hub). Hubs may be added to bus topologies; for example, a hub can turn an Ethernet network into a star topology to improve troubleshooting.

IP Address - IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies an single, unique Internet computer host. Example: 192.34.45.8.

ISP - Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations.

LAN - A communications network that serves users within a confined geographical area. It is made up of servers, workstations, a network operating system and a communications link. Servers are high-speed machines that hold programs and data shared by network users. The workstations (clients) are the users' personal computers, which perform stand-alone processing and access the network servers as required.

Diskless and floppy-only workstations are sometimes used, which retrieve all software and data from the server. Increasingly, "thin client" network computers (NCs) and Windows terminals are also used. A printer can be attached locally to a workstation or to a server and be shared by network users. Small LANs can allow certain workstations to function as a server, allowing users access to data on another user's machine. These peer-to-peer networks are often simpler to install and manage, but dedicated servers provide better performance and can handle higher transaction volume. Multiple servers are used in large networks.

MAC Address - MAC (Media Access Control) A MAC address is the hardware address of a device connected to a network.

MDI / MDI-X - Medium Dependent Interface - Also called an "uplink port," it is a port on a network hub or switch used to connect to other hubs or switches without requiring a crossover cable. The MDI port does not cross the transmit and receive lines, which is done by the regular ports (MDI-X ports) that connect to end stations. The MDI port connects to the MDI-X port on

Image 31
Contents Page Trademarks CopyrightIndustry Canada Class B CompliancesFCC Class B FCC Radiation Exposure StatementSystem Requirements Package Contents Getting Started… Other Setup Processes Windows 98SE Driver Installation Option 2 Windows 98SE/Me/2000/XPWindows Me Windows Windows XP Windows 98/Me Driver Verification Windows 98SE/Me/2000/XPWindows XP Utility Installation Windows 98SE/Me/2000/XP Page Page Utility Configuration Configuration Link Information Site Survey IP InformationVersion Information Disable Wireless Zero Configuration Windows XP Page Page Common Installation Problems TroubleshootingNetwork Connection Problems Technical Specifications Dimensions LED IndicatorsPower Voltage Power Consumption Frequently Asked Questions What is WEP? What is RTS Threshold?What is Authentication Algorithm? What is DBI?Terminology Page