OPERATING INSTRUCTIONS

DFX & DBX Series Vent Free Fireplaces

MANUAL control lighting instructions

1.STOP! Read the safety information.

2.Make sure the manual shutoff valve is fully open.

3.This heater is equipped with an ignition device (piezo) which automatically

lights the pilot.Rotate

4.

Refer to Page 22, Figure 23 for the location of the piezo ignitor and control

 

 

 

knob. Push in gas control knob slightly and turn control knob clockwise

 

 

 

 

 

 

to the OFF position.

 

 

 

NOTE: Knob cannot be turned to OFF unless knob is pushed in slightly. Do

 

 

 

not force.

 

 

5.

Wait 5 minutes to clear out any gas. Then smell for gas, including near the

Figure 29 -

 

floor. If you smell gas STOP! Follow the instructions under “What to Do if You

 

IGN Position

Smell Gas”, Page 22. If you do not smell gas, go to the next step.

6.From OFF position, push in gas control knob slightly and turn counterclock-

wise to the IGN position. Figure 29. Push in and hold control knob for 5

seconds.

Rotate

NOTE: If you are running the heater for the first time, it will be necessary to

press in the control knob for 30 seconds to allow air to bleed out of the gas

 

piping.

 

7.With the control knob pushed in, push and release the piezo ignitor button to light the ODS pilot. The pilot is located on the left side of the heater, behind

 

the middle log and in front of the back log. If piezo ignitor does not light the

Figure 30 -

 

pilot, refer to “Match Lighting Instructions”, Page 26.

 

HIGH Position

8.

Hold the control knob in for an additional 10 seconds to prevent the ODS pilot

 

from shutting off the gas while the thermocouple is warming up.

 

 

 

9.

Release the control knob.

 

 

 

 

 

 

• If the knob does not pop out when released, stop and immediately call your

Rotate

 

 

 

 

service technician or gas supplier.

 

 

 

 

 

 

 

 

• If the ODS pilot will not stay lit after several tries, push and turn the gas

 

 

 

 

 

 

 

 

 

 

 

 

control knob clockwise

to OFF and wait 15 seconds. Repeat steps 6

 

 

 

 

through 9.

 

 

 

 

 

10.

Push in control knob and turn counterclockwise

to the HIGH setting. At

 

 

 

 

this location the control knob will pop out when positioned correctly. The knob

 

 

 

can now be positioned at any position between HIGH and LOW. Figures 30

Figure 31 -

LOW Position

and 31

 

Push

Push

WARNING

Wait 30 seconds before readjusting the heater when the control knob has been turned down to a lower setting.

TO TURN OFF GAS TO HEATER

1.Turn control knob clockwise to OFF position to completely shut off the heater.

2.If applicable: Turn off all electric power to the heater.

33D4047

23

Page 22 Page 24
Page 23
Image 23
Monessen Hearth DBX24C manual Manual control lighting instructions, Operating Instructions
Page 22 Page 24

DBX24C specifications

The Monessen Hearth DBX24C is a remarkable addition to the landscape of home heating solutions. Known for its efficient performance and modern design, this direct vent gas fireplace offers both functionality and aesthetic appeal, making it a top choice among homeowners.

One of the standout features of the DBX24C is its sleek, contemporary appearance. The fireplace has a clean face design that maximizes the viewing area of the flames, creating a captivating focal point in any room. It is available in various decorative options, including multiple media layouts, which allow users to personalize their fireplace to match their interior decor.

Efficiency is a key characteristic of the Monessen Hearth DBX24C. With an impressive efficiency rating, it provides effective heating while utilizing fuel resources wisely. The direct vent design ensures that combustion gases are expelled outside, promoting safer indoor air quality and allowing for versatile installation options, including exterior walls and through the roof.

Equipped with advanced technologies, the DBX24C boasts an impressive burner system that produces an alluring flame pattern, replicating the look of real wood. This fireplace uses high-quality ceramic glass that not only provides durability but also enhances heat output. The ceramic glass allows for excellent visibility of the flames while reflecting heat back into the living space.

The DBX24C features user-friendly controls, with options for remote operation and adjustable flame settings. This enables homeowners to easily customize their heating experience, whether they desire a cozy ambiance for gatherings or a warmer atmosphere on chilly nights. Additionally, its minimal maintenance requirements make it a practical choice for busy homeowners.

In terms of safety, the Monessen Hearth DBX24C incorporates several built-in features, such as heat sensors that monitor the unit’s temperature and safety shutoff systems that activate if the fireplace reaches excessive heat levels. This commitment to safety further enhances its appeal for families.

In summary, the Monessen Hearth DBX24C offers an exceptional blend of efficiency, style, and technology. Its modern design, customizable features, and commitment to safety make it an outstanding choice for those seeking a reliable and aesthetically pleasing heating solution for their homes. Whether you are looking to enhance your living space with a beautiful centerpiece or simply desire effective warmth, this gas fireplace delivers on all fronts.
Top Page Image Contents