Preinstallation information

 

 

• Handle the gas log burner assembly by

 

WARNING

the grate only. Do not pick the unit up by

 

the burners.

 

 

 

 

• Gloves are recommended when handling

 

 

ceramic fiber logs to prevent skin irritation

 

 

from loose fibers. Logs are fragile —

 

 

handle with care.

 

 

 

GETTING STARTED

Make sure you have received all parts:

Check your packing list to verify that all listed parts have been received. You should have the following:

• Unvented gas heater

• Trim kit

•Two (2) 90°-angle brackets • Ceramic fiber logs

•Installation/operating instructions

•Canopy and three (3) screws

• Two (2) anchoring screws • Four (4) black screws

Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.

•Hand held Remote with receiver

•Wall T-stat with 20' wire

•Wall switch with 20' wire

•Hand held Thermostat Remote w/receiver

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts in good condition.

What you will need for installation:

You must have the following items available before pro- ceeding with installation:

•External regulator (for propane/LPG only)

•Manual shutoff valve

•Piping which complies with local codes

•Sediment trap

•Phillips head screwdriver

•Tee joint.

•Pipe sealant approved for use with propane/LPG

•Pipe wrench

(Resistant to sulfur compounds)

33D4047

DFX & DBX Series Vent Free Fireplaces

 

WARNING

Do not install the heater:

 

• Where curtains, furniture, clothing, or

 

 

 

 

other flammable objects are less than

 

 

42" from the front of the heater.

 

 

• In high traffic areas.

 

 

• In windy or drafty areas.

 

 

 

In planning the installation for the fireplace it is necessary to determine where the unit is to be installed and whether optional accessories are desired. Gas supply piping should also be planned. The following steps represent the normal sequence of installation. Each installation is unique, how- ever, and might require a different sequence.

1.Position fireplace in desired location. Refer to the Loca- tion of Fireplace and Clearances and Height Require- ments, and Firebox Framing sections found in this manual.

Note: Be sure all packing material has been removed from underside the unit.

2.Install canopy and logs per instructions found in this manual. The canopy MUST be installed for safe opera- tion of the unit.

3.Field wire main power supply to units with fan kit. Refer to the Electrical Section found in this manual. (Electrical connections should only be performed by an experi- enced, licensed certified tradesman).

4.Install optional ON/OFF kit on units with millivolt control. Refer to the installation instructions included with the kit and also refer to the Electrical Wiring section found in this manual.

5.Plumb gas line. Refer to the Connecting the Gas sec- tion found in this

manual. (Gas connections should only be performed by an experienced,

licensed/certified tradesman).

6.Complete finish wall material and/or surround.

Page 6 Page 8
Page 7
Image 7
Monessen Hearth DBX24C manual Preinstallation information, Getting Started
Page 6 Page 8

DBX24C specifications

The Monessen Hearth DBX24C is a remarkable addition to the landscape of home heating solutions. Known for its efficient performance and modern design, this direct vent gas fireplace offers both functionality and aesthetic appeal, making it a top choice among homeowners.

One of the standout features of the DBX24C is its sleek, contemporary appearance. The fireplace has a clean face design that maximizes the viewing area of the flames, creating a captivating focal point in any room. It is available in various decorative options, including multiple media layouts, which allow users to personalize their fireplace to match their interior decor.

Efficiency is a key characteristic of the Monessen Hearth DBX24C. With an impressive efficiency rating, it provides effective heating while utilizing fuel resources wisely. The direct vent design ensures that combustion gases are expelled outside, promoting safer indoor air quality and allowing for versatile installation options, including exterior walls and through the roof.

Equipped with advanced technologies, the DBX24C boasts an impressive burner system that produces an alluring flame pattern, replicating the look of real wood. This fireplace uses high-quality ceramic glass that not only provides durability but also enhances heat output. The ceramic glass allows for excellent visibility of the flames while reflecting heat back into the living space.

The DBX24C features user-friendly controls, with options for remote operation and adjustable flame settings. This enables homeowners to easily customize their heating experience, whether they desire a cozy ambiance for gatherings or a warmer atmosphere on chilly nights. Additionally, its minimal maintenance requirements make it a practical choice for busy homeowners.

In terms of safety, the Monessen Hearth DBX24C incorporates several built-in features, such as heat sensors that monitor the unit’s temperature and safety shutoff systems that activate if the fireplace reaches excessive heat levels. This commitment to safety further enhances its appeal for families.

In summary, the Monessen Hearth DBX24C offers an exceptional blend of efficiency, style, and technology. Its modern design, customizable features, and commitment to safety make it an outstanding choice for those seeking a reliable and aesthetically pleasing heating solution for their homes. Whether you are looking to enhance your living space with a beautiful centerpiece or simply desire effective warmth, this gas fireplace delivers on all fronts.
Top Page Image Contents