Monessen Hearth DBX24C Flame Appearance, 2” - 4”, Checking burner flame, Operating Instructions

FLAME APPEARANCE DFX & DBX Series Vent Free Fireplaces

Checking burner flame

DFX24C and DFX32C models

In normal operation at full rate after 15 minutes, the follow- ing flame appearances should be observed:

Burner will have a random pattern of yellow flames. Fig- ures 25 and 26. There should be glowing embers in front of burner.

DBX24C model

In normal operation at full rate after 15 minutes, the follow- ing flame appearances should be observed:

The flames inside the one-piece log may be yellow. The flames should extend approximately 2" - 4" above the log. Figure 27

NOTE: The front flames and embers will be an opaque orange color during the burn off time.

Figure 25 -

DFX24C Log Flame Appearance

LG703

Figure 26 -

DFX32C Log Flame Appearance

LG704	Figure 27 -
	DBX24C Log Flame Appearance

OPERATING INSTRUCTIONS

Avoid any drafts that alter burner flame patterns. Do not allow fans to blow directly into the fireplace. Do not place a blower inside the burn area of the firebox. Ceiling fans may create drafts that alter flame patterns. Sooting and improper burning will result.

During manufacturing, fabricating and shipping, various components of this appliance are treated with certain oils, films or bonding agents. These chemicals are not harmful, but may produce annoying smoke and smells as they are burned off during the initial operation of the appliance, possibly causing headaches or eye or lung irritation. This is a normal and temporary occurrence.

The initial break-in operation should last two to three hours with the burner at the highest setting. Provide maximum ventilation by opening windows or doors to allow odors to dis- sipate. Any odors remaining after this initial break-in will be slight and will disappear with continued use.

This appliance must not be used with glass doors in the closed position. This can lead to pilot outages and severe sooting outside the fireplace.

2” - 4”

LG705

33D4047 21